Nitoflor® DS5000
Nitoflor DS5000 is a three part solvent-free combination of epoxy resin modified amine hardeners filled with specially coloured and selected high crushing strength, chemicallyinert aggregates.
Nitoflor DS5000 is laid by trowel at 3-5mm thickness depending on the requirement. The system includes Nitoprime 25, two part primer. Nitoflor DS5000 is supplied inpreweighed units ready for on site mixing and application.The finished cured floor has a slightly granular texture. An epoxy sealer coat like Nitoflor FC140 clear or Nitoflor FS500clear is recommended.
Description
Uses
Nitoflor DS5000 provides an extremely high strength floor topping with exceptional resistance to the surface mechanical wear and attack from chemical spillage. It has a safe non-slip finish for personnel and vehicular traffic
Ideally suited for Laboratories, automobile showrooms,pharmaceuticals, dairies and breweries.
In areas where high degrees of cleanliness and chemical resistance are required, the surface of Nitoflor DS5000 can be sealed with Nitoflor FC140 clear. followed by NitoflorFS500 clear.
Packaging
- Nitoprime 25 Pack Size 1 & 4 L Approximate coverage rate5.5 – 6.5 m2/L
- Nitoflor DS5000 Pack Size 7.5L Approximate coverage rate1.5 m2 / Pack@5000 microns
Storage
Nitoprime25 and Nitoflor DS5000 have a shelf life of 12 months when stored in a dry place below 350C.
