Fosroc Chemicals

    • Placeholder Image
      Read more
      • , ,

      • Fosroc Nitocote CM210

      • Nitocote CM210 two-component polymer modified cementitious coating is supplied in a pre-packaged form. The product has been designed to be easily mixed on-site using a slow speed drill and paddle and then applied to the substrate using a brush, roller, trowel or by spray application. Nitocote CM210, available in grey and white, cures to form a flexible impermeable membrane.
    • Placeholder Image
      Read more
      • , ,

      • Fosroc Polyurea WPE

      • Fosroc Polyurea WPE is a spray-applied, 100% solids, flexible, two-component, rapid curing pure Polyurea system, designed as a waterproofing and protective coating. It combines the advantages of seamless coating with very long life cycles and high durability. Fosroc Polyurea WPE consists of the two components Fosroc Polyurea WPE Part A ISO and Fosroc Polyurea WPE Part B AMINE. The system…
    • Placeholder Image
      Read more
      • , ,

      • Fosroc Renderoc HSXtra

      • Renderoc HSXtra is supplied as a ready to use blend of dry powders, which requires only the addition of clean water to produce a highly consistent, repair mortar suitable for structural concrete and masonry repairs. Renderoc HSXtra may be hand applied or sprayed with suitable equipment, please see application method statement for details.
    • Placeholder Image
      Read more
      • , ,

      • Fosroc Renderoc LA

      • Renderoc LA is supplied as a ready to use blend of dry powders requiring only the site addition of clean water to produce a free-flowing, shrinkage compensated micro-concrete suitable for large volume concrete repairs at nominal thicknesses in excess of 50 mm. The material is based on Portland cement, graded aggregates and additives which impart controlled expansion in both the…
    • Placeholder Image
      Read more
      • , ,

      • Galvashield CC

      • Galvashield CC galvanic anodes are used to control on-going corrosion and to prevent the initiation of new corrosion activity in reinforced concrete structures. Galva shield CC consists of a sacrificial zinc core activated within a specially formulated cementitious mortar. The cylindrical unit, available in a varietyof standard sizes, is quickly and easily installed into concrete that is mechanically sound but…
    • Placeholder Image
      Read more
      • , ,

      • Galvashield LJ

      • Galvashield LJ is designed to provide a cost effective, reliable method of reinstating and Cathodically Protecting severely exposed reinforced concrete / structural steel elements.Galvashield LJ is composed of a prefabricated fibre glass jacket lined with expanded zinc mesh conforming to ASTMB69-01a for A190 alloy. The zinc mesh is connected to the steel reinforcement to provide the required protective currentto the…
    • Placeholder Image
      Read more
      • , ,

      • Galvashield XP

      • Galvashield XP embedded galvanic anodes are used inconcrete rehabilitation to prevent the formation of new corrosion sites on adjacent rebar. The anode consists of a sacrificialzinc core activated within a specially formulated cementitious mortar. The XP unit is fixed to the reinforcing steel by means of tie wires, which allow attachment in horizontal, vertical and overhead locations. Once installed, the…
    • Placeholder Image
      Read more
      • , ,

      • Hydrocell XL

      • Hydrocell XL is a cross linked, semi-rigid, closed cell polyethylene sheet material used for forming or filling expansion joints between adjacent in-situ or precast components. Hydrocell XL provides excellent support backing to elastomeric sealants and is especially recommended for use in expansion joints in brickwork and in the construction of water retaining and water excluding structures.
    • Placeholder Image
      Read more
      • , ,

      • Lokfix

      • The three versions of Lokfix polyester resin grout are all pre-measured, two part, filled polyster resin grouts. After hardening the grout produces anchorages of consistent reproducible values. The versions are : Lokfix L is used where hole diameter exceeds bar diameter by 25 to 50mm. Lokfix S is used where the difference between the holediameter and bar diameter is <…
    • Placeholder Image
      Read more
      • , ,

      • Nitobond AR

      • Nitobond AR is a modified acrylic emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications. Nitobond AR is the recommended primer for the Fosroc cementitious repair system.
    • Placeholder Image
      Read more
      • , ,

      • Nitobond AR(M)

      • Nitobond AR(M) is a modified acrylic emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications. Nitobond AR(M) is the recommended primer for the Fosroc cementitious repair system.
    • Placeholder Image
      Read more
      • , ,

      • Nitobond EP

      • Nitobond EP is based on solvent free epoxy resins containing pigments and fine fillers. It is supplied as a two part material in pre weighed quantities for ready onsite mixing and use. Coloured components - white base and green hardener -provide visual evidence that adequate mixing is achieved.
    • Placeholder Image
      Read more
      • , ,

      • Nitobond PC

      • Nitobond PC thixotropic epoxy adesive is a 2 pack solvent free epoxy resin system consisting of a white base and black hardener in pre weighed quantities for easy onsite mixing.The product is available in three grades :„ Nitobond PC 20 - Fast set for application between 50C to200 C „Nitobond PC 30 - Medium Fast set for application between1 50C…