Construction Chemical

    • Placeholder Image
      Read more
      • , ,

      • Nitofill UR63

      • Nitofill UR63 is a two part liquid polyurethane. When mixed in the proportion supplied they react to form a tough, slightly flexible resin. Nitofill UR63 has a good adhesion to concrete and masonry and when injected into cracks it allows some movement without loss of bond.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor TF30

      • Nitoflor TF30, is a three part solvent-free combination of epoxyresin, modified amine hardeners filled with specially graded and selected high crushing strength, chemically inert aggregates. It is laid by trowel at approximately 3-6 mm thickness depending on the requirement. It is highly chemical and abrasion resistant. The system includes Nitoprime 25 a two pack epoxy resin primer . Nitoflor TF30…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor TF5000

      • Nitoflor TF5000 is a three part solvent-free combination of epoxy resin, modified amine hardeners filled with specially graded and selected high crushing strength, chemically inert aggregates. It is laid by trowel as a durable chemical resistant screed at 3to 6 mm thickness depending on the requirement. This nominal thickness provides an impervious topping which is highly chemical resistant by the…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor TF5050

      • Nitoflor TF5050 is a four-component water miscible epoxyscreed system, based on new generation epoxy resin technology, supplied in pre-weighed packs ready for on-sitemixing and use. The cured screed forms a hard, matt and water vapour permeable seal to concrete. This permeability allows it to beapplied on damp substrates and green concrete
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor TS5000

      • The Nitoflor TS5000, is a three part solvent free combination of epoxy resin, modified amine hardeners filled with specially graded and selected high crushing strength, heavy density aggregates. Nitoflor TS5000 durable abrasion resistant screed is laid by trowel at 3 to 6 mm thickness depending on the requirement. The system includes Nitoprime 25, two part primer. NitoflorTS5000 screed and Nitoprime…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor Uragard CR

      • Nitoflor Uragard CR is a polyurethane based hybrid floor screed designed for use at thickness between 5 mm and 10mm. The product is formulated specifically to with stand chemical attack. The product is supplied as a four-component system (including colour pack), pre-weighed for on-site mixing.Standard colours include brick red, dark grey, green (RAL6032)and blue (RAL5012).
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor Uragard CR400

      • Nitoflor Uragard CR400 is a solvent free system based on polyurethane resins and curing agents specially selected for their ability to withstand chemical attack. The system consists of pre-weighed base & hardener components and a Nitoflor colour pack, all of which contain reactive elements that areessential to the installation of the system. A slip resistant texture can be provided by…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor Uragard SL

      • Nitoflor Uragard SL is a polyurethane based self levelling system designed for application depth of 6mm or greater.The system is formulated specifically to withstand thermal shocks, freeze/thaw cycles and chemical attack. The product is supplied as a four-component system (including colour pack), pre-weighed for on-site mixing. Standard colours include brick red, grey and mid green.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor Uragard TF

      • Nitoflor Uragard TF is a polyurethane based floor screed designed for use at thickness between 5 mm and 12 mm.The product is formulated specifically to withstand thermal shock, freeze/thaw cycles and chemical attack. The product is supplied as a four-component system (including colour pack), pre-weighed for on-site mixing. Standard colours include brick red, grey and mid green.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® CC100

      • Nitoflor CC100 is a two component polyurethane floor coating.The cured product forms a pigmented,conductive coat with a surface resistance of 5 x 104 - 1 x 106 Ohm, for epoxy or polyurethane floors. Colours Nitoflor CC100 can be supplied only in silver grey. Please contact Fosroc.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® DS5000

      • Nitoflor DS5000 is a three part solvent-free combination of epoxy resin modified amine hardeners filled with specially coloured and selected high crushing strength, chemicallyinert aggregates. Nitoflor DS5000 is laid by trowel at 3-5mm thickness depending on the requirement. The system includes Nitoprime 25, two part primer. Nitoflor DS5000 is supplied inpreweighed units ready for on site mixing and application.The finished…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® ET Slurry

      • Nitoflor ET Slurry, a three component system is based on coal tar modifed epoxy resins, amine curing agents and chemically inert, graded silica fillers which when mixed forms a fluid, homogenous slurry. The components of Nitoflor ET Slurry system are supplied inpreweighed quantities ready to use on site.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® EU5

      • Nitoflor EU5 consists of special resins and graded aggregates formulated to withstand chemical attack and impact shock. The product is supplied as a 3 component system comprising resin base, resin hardener and fillers.When correctly laid Nitoflor EU5 will provide a surface ready to receive applications of other Fosroc flooring systems.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® FC110

      • Nitoflor FC110 is a two part, polyurethane system. It has excellent adhesion to cementitious surfaces and when cured,forms a semigloss flexible film. It penetrates the surface to bind together the particles to produce a hardwearing and impermeable surface. It is supplied in two parts and requires mixing on site.