Nitoflor TF30
Nitoflor TF30, is a three part solvent-free combination of epoxyresin, modified amine hardeners filled with specially graded and selected high crushing strength, chemically inert aggregates.
It is laid by trowel at approximately 3-6 mm thickness depending on the requirement. It is highly chemical and abrasion resistant. The system includes Nitoprime 25 a two pack epoxy resin primer . Nitoflor TF30 and Nitoprime 25supplied in pre-weighed units ready for on site mixing and application. The finished, cured floor has a slightly granulartexture of uniform self colour.
However, as the natural grade takes its colour from the aggregate which is subject to variation, colour matching is not practicable with this grade. A three part epoxy sealing coat of Nitoclor FC140 is recommended as a topcoat forNitoflor TF30 epoxy screed. Nitoflor FC140 is available in a range of attractive colours.
Description
Uses
Nitoflor TF30 provides a high strength floor topping with exceptional resistance to mechanical wear and chemical spillage attacks, produces a safe non-slip finish for personnel and vehicular traffic.
Ideally suited for heavy engineering plants, chemical handling and process areas, steelworks, dairies, breweries, oil refineries, paint workshops, battery rooms, plating factories and food processing plants.
In areas where high degrees of cleanliness are required the surface of Nitoflor TF30 can be sealed with Nitoflor FC140epoxy resin floor coating.
Packaging
- Nitoprime 25 1 and 4 L Pack.
- Nitoprime 28 5 Kg Pack.
- Nitoflor TF30 12 L Pack.
Storage
Nitoprime 25, Nitoprime 28 and Nitoflor TF30 have a shelf life of 12 months when stored in a dry place below 350C.
