Nitomortar PE
Nitomortar PE products are based on a polyester resin system. There are two grades:
- Nitomortar PE – for general purpose use
- Nitomortar PE Concrete – a special grade allowing users to add suitable aggregate, thereby substantially reducing the cost of infilling larger voids.
Winter versions of both products are available which are faster setting at low ambient temperatures. Both grades of Nitomortar PE are supplied as two-component products withpre-weighed quantities of liquid resin and powdered hardener, ready for on-site mixing and use. The hardener system enables the mix to be varied from a pourable consistency to a trowellable mortar without significantly affecting the setting times or strengths achieved. This makes the product extremely reliable in use
Description
Uses
For fast and emergency reinstatement of concrete, bedding,jointing and reprofiling of concrete, masonry and brickwork. Nitomortar PE is ideally suited for the repair and reprofiling of precast concrete units, damaged arrises and treads. It can be used to infill hollows and holes in concrete floors, beddingand fixing kerbstones, manhole sets, frames, brick slips,ceramic tiles, slabs and coping stones. Nitomortar PE Concrete should be used to repair larger voids. The products are especially useful where fast strength gain is important.When properly compacted, they are highly impermeable.
Packaging
- Nitomortar PE Mortar:5 litre packs
- Nitomortar PE Concrete:5 litre packs
Storage
Nitomortar PE Mortar and Nitomortar PE Concrete have a shelf life of 9 months at 20°C if kept in a dry store in the original,unopened bags or packs.
If stored at high temperatures and/or high humidity conditions the shelf life will be significantly reduced.
