Lokfix
The three versions of Lokfix polyester resin grout are all pre-measured, two part, filled polyster resin grouts. After hardening the grout produces anchorages of consistent reproducible values.
The versions are :
- Lokfix L is used where hole diameter exceeds bar diameter by 25 to 50mm.
- Lokfix S is used where the difference between the holediameter and bar diameter is < 25mm.
- Lokfix P is used in overhead or horizontal holes where bar /hole relationship conforms to Lokfix polyester resin grout S.The thixotropic nature of Lokfix polyester resin grout P reduces flow of grout out of the hole
Description
Uses
Lokfix are used for high strength corrosion resistant anchoring of bolts and bars from 12 – 51mm diameter into concrete,rock, masonry or brickwork where high speed of installation and early application of load is required.
Permanent installation of reinforcement starter bars,foundation bolts, base plates, balustrading, barriers and safety fences, railway tracks, tie-back anchors, reinforcement dowelling abutments, ground anchors for towers, cranes,dock sills
Packaging
- Lokfix S/P:0.5 and 2.5 L Packs
- Lokfix L:18 L
- Nitoflor Sol:5 litres and 20 litres.
Storage
The product should be stored away from high temperature.6months shelf life when stored below 250C in original unopened containers.
