• Placeholder Image
      Read more
      • , ,
      • Accelerator BMW

      • WATERPLUG (S) is a fast setting hydraulic compound stops running water instantly. WATERPLUG (S) sets in 1 to 3 minutes depending upon the temperature of mixing water and the surface to which it is applied. Lower temperature will retard the setting time and higher temperature accelerates the setting time.
    • Placeholder Image
      Read more
      • , ,
      • Auramix 350 DIS

      • Auramix 350 DIS is a unique combination of new generation su-per plasticizer based on polycarboxilic ether polymer with long lateral chain. Electrostatic dispersion mechanism considerably reduces the water demand in fl owable concrete. It is supplied as a light brown liquid, instantly dispersible in water. Auramix 350 DIS disperses the cement particles effectively in the concrete mix and hence exposes…
    • Placeholder Image
      Read more
      • , ,
      • Brushbond

      • Brushbond is a two component acrylic polymer modifiede lastomeric waterproofing membrane which consists of Brushbond powder and Nitobond BB acrylic emulsion. It requires only the addition of water on site and when mixed in the proper proportions, an easily brushable coating is produced. Brushbond can simply be applied by a stiff brush,or trowel to obtain the desired thickness. Brushbond powder…
    • Placeholder Image
      Read more
      • , ,
      • Brushbond RFX

      • Brushbond RFX is a two component acrylic polymer modified cementitious coating which consists of Brushbond RFX powder and Nitobond BBX acrylic emulsion. It requires only the addition of clean water at site to produce an easily brushable coating. Brushbond RFX can simply be applied by stiff brush,roller or trowel to obtain the desired thickness
    • Placeholder Image
      Read more
      • , ,
      • Brushbond Coolcoat

      • Brushbond Coolcoat is a water-based white coloured emulsion comprising of polymers and specially designed hollow “microspheres”, less than 100 microns in diameter with non conductive properties. These microspheres collectively acts as thermal insulation blanket covering the structure effectively reflecting solarradiation back into the atmosphere. This results in impressive temperature reduction behind the substrate
    • Placeholder Image
      Read more
      • , ,
      • Brushbond TGP

      • Brushbond TGP* crystalline capillary waterproofing system contains proprietary blend of portland cement, quartz aggregate and special chemicals. In the presence of moisture, the active chemicals in Brushbond TGP* crystalline waterproofing system penetrates concrete and react chemically with free lime to produce insoluble crystals. This crystalline growth reduces porosity by blocking capillaries and filling hairline non structural cracks ( upto 0.25mm…
    • Placeholder Image
      Read more
      • , ,
      • Brushbond TI Flexicoat

      • Brushbond TI Flexicoat is a water-based white colouredemulsion comprising of acrylic polymers and specially designed hollow “microspheres”, less than 100 microns indiameter with non conductive properties These microspheres collectively acts as thermal insulation blanket covering the structure effectively reflecting solar radiation back into the atmosphere. This results in impressive temperature reduction behind the substrate by a min. of 10oC. This…
    • Placeholder Image
      Read more
      • , ,
      • Cebex® 100

      • Cebex 100, a plasticised expanding grout admixture is supplied as a powder. The material is a combination of a plasticising agent and a gas producing expansion medium.The plastisicing agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and…
    • Placeholder Image
      Read more
      • , ,
      • Cebex® FCC422

      • Cebex FCC422 is supplied as a powder additive. The material is a combination of a plasticising agent, and a gas producing expansive medium, with suitable fillers; which generates gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. Stability and cohesion of grout are greatly increased. The selected fillers used…
    • Placeholder Image
      Read more
      • , ,
      • Cebex®200

      • Cebex 200 a plasticising and hydrogen free expansion grout admixture is supplied as a powder admixture. Cebex 200allows the use of a reduced water / cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.
    • Placeholder Image
      Read more
      • , ,
      • Cemtop® 250T

      • Cemtop 250T is a blend of specially selected cements,graded aggregates, polymers and set control additives. It is supplied as a dry, grey powder which requires only the addition of water to produce a smooth free flowing and self levelling material which can be laid to a feather edge. This provides an ideal fairing material for levelling uneven, in situ or…
    • Placeholder Image
      Read more
      • , ,
      • Cemtop® 400SD

      • Cemtop 400SD is a blend of selected cements, hard-wearinggraded aggregates modified with polymers and flow agents.It is supplied as a dry, grey powder which requires only the addition of water to produce a self smoothing, free flowing material. Cemtop 400SD may be applied by hand or by use of acontinuous mixer pump.
    • Placeholder Image
      Read more
      • , ,
      • Cemtop® HD

      • Cemtop HD is a blend of selected cements, graded aggregates, polymers and flow agents. It is supplied as a dry, grey powder which requires only the addition of water to produce a self smoothing, free flowing material. Cemtop HD may be applied either by hand, or via the use of a continuous mixer pump
    • Placeholder Image
      Read more
      • , ,
      • Colpor 200

      • Fosroc Colpor 200 cold applied, two part polyurethanesealant is designed for joints in concrete paved areas. The capability of accommodating cyclic movements is retained by Colpor 200 throughout extremes of temperature conditions. Colpor 200 is resistant to fuel, oil and hydraulic fluid spillage,will not harden in cold weather nor become excessively soft or pick up in hot conditions. Colpor 200…
    • Placeholder Image
      Read more
      • , ,
      • Conbextra GP2

      • Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free lowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water…
    • Placeholder Image
      Read more
      • , ,
      • Conbextra GP3

      • Conbextra GP3 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses upto 100mm. Conbextra GP3 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand…
    • Placeholder Image
      Read more
      • , ,
      • Conbextra GPI

      • Conbextra GPI is supplied as a ready to use dry powder,requiring only the addition of water to produce a free-flowing,non-shrink grout. The material is blend of specially processedcement, pregraded fillers and additives which impart : Good early and final strengths due to very low waterr equirement„ Controlled expansion to retain the original volume filledeven after setting„ Free flow characteristics without…