Repairs

    • Placeholder Image
      Read more
      • , ,

      • Exposeal UW

      • Exposeal UW is a thixotropic, solvent free, two component compound based on water insensitive epoxy resins, inertfillers and thixotropic agents designed for applying in dampand submerged conditions. It is applied directly to concretefor filling cracks, blow holes etc., which cures to form a strong seal.
    • Placeholder Image
      Read more
      • , ,

      • Fosroc Renderoc HSXtra

      • Renderoc HSXtra is supplied as a ready to use blend of dry powders, which requires only the addition of clean water to produce a highly consistent, repair mortar suitable for structural concrete and masonry repairs. Renderoc HSXtra may be hand applied or sprayed with suitable equipment, please see application method statement for details.
    • Placeholder Image
      Read more
      • , ,

      • Fosroc Renderoc LA

      • Renderoc LA is supplied as a ready to use blend of dry powders requiring only the site addition of clean water to produce a free-flowing, shrinkage compensated micro-concrete suitable for large volume concrete repairs at nominal thicknesses in excess of 50 mm. The material is based on Portland cement, graded aggregates and additives which impart controlled expansion in both the…
    • Placeholder Image
      Read more
      • , ,

      • Galvashield CC

      • Galvashield CC galvanic anodes are used to control on-going corrosion and to prevent the initiation of new corrosion activity in reinforced concrete structures. Galva shield CC consists of a sacrificial zinc core activated within a specially formulated cementitious mortar. The cylindrical unit, available in a varietyof standard sizes, is quickly and easily installed into concrete that is mechanically sound but…
    • Placeholder Image
      Read more
      • , ,

      • Galvashield LJ

      • Galvashield LJ is designed to provide a cost effective, reliable method of reinstating and Cathodically Protecting severely exposed reinforced concrete / structural steel elements.Galvashield LJ is composed of a prefabricated fibre glass jacket lined with expanded zinc mesh conforming to ASTMB69-01a for A190 alloy. The zinc mesh is connected to the steel reinforcement to provide the required protective currentto the…
    • Placeholder Image
      Read more
      • , ,

      • Galvashield XP

      • Galvashield XP embedded galvanic anodes are used inconcrete rehabilitation to prevent the formation of new corrosion sites on adjacent rebar. The anode consists of a sacrificialzinc core activated within a specially formulated cementitious mortar. The XP unit is fixed to the reinforcing steel by means of tie wires, which allow attachment in horizontal, vertical and overhead locations. Once installed, the…
    • Placeholder Image
      Read more
      • , ,

      • Nitofill UR63

      • Nitofill UR63 is a two part liquid polyurethane. When mixed in the proportion supplied they react to form a tough, slightly flexible resin. Nitofill UR63 has a good adhesion to concrete and masonry and when injected into cracks it allows some movement without loss of bond.
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar 30

      • Nitomortar 30 is a three part solvent free combination of epoxyresin, modified amine hardeners filled with specially graded chemically inert aggregates with high crushing strength. It is applied by trowel as a durable chemical resistant repair mortar 3-6 mm thick depending upon the requirement. The system includes Nitoprime 25 a two part epoxy resin primer and Nitomortar 30 which are…
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar FC

      • Nitomortar FC is a two component thixotropic, solvent free,compound based on epoxy resins, graded fillers and thixotropic agents. It is applied directly to concrete substrates,without primer, and cures to a surface ready for over coating.The base component is light grey coloured and the hardener black to ease identification of uniform mixing.
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar PE

      • Nitomortar PE products are based on a polyester resin system. There are two grades: Nitomortar PE - for general purpose use Nitomortar PE Concrete - a special grade allowing users to add suitable aggregate, thereby substantially reducing the cost of infilling larger voids. Winter versions of both products are available which are faster setting at low ambient temperatures. Both grades…
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar S

      • Nitomortar S is based on a high quality solvent-free epoxyresin system. The special silica aggregates provide high strength and excellent abrasion resistance. Nitomortar S is a three - component material supplied in pre-weighed quantities ready for on-site mixing and use.
    • Placeholder Image
      Read more
      • , ,

      • Nitowrap EP(CF)

      • Nitowrap EP(CF) is a carbon fibre composite wrapping system where Nitowrap (CF) is used in conjunction with an epoxy sealer cum primer, Nitowrap 30 and a high build epoxysaturant Nitowrap 410. The system is protected by a polyurethane top coat of Nitowrap 512 in case of atmospherically exposed structures
    • Placeholder Image
      Read more
      • , ,

      • Nitowrap EP(GF)

      • Nitowrap EP(GF) is a glass fibre composite wrapping system where Nitowrap GF is used in conjunction with an epoxy sealercum primer, Nitowrap 30, and a high build epoxy saturant Nitowrap 410. The system is protected by a polyurethane topcoat of Nitowrap 512 in case of atmospherically exposed structures.
    • Placeholder Image
      Read more
      • , ,

      • Norcure Chloride Extraction

      • Chloride extraction is carried out by applying a regulated current in order to create a safe electric field between the reinforcement in the concrete and a temporary, externally mounted anode mesh. During the treatment negatively charged chloride ions are driven from the concrete by an induced positive/negative field effect. Concurrent to the chloride ion removal process, electrolysis at the reinforcement…
    • Placeholder Image
      Read more
      • , ,

      • Norcure Realkalisation

      • Realkalisation is carried out by applying a safe electric current between the reinforcement in the concrete and a temporary,externally mounted anode mesh. During treatment, analkaline electrolyte solution is transported into the concreteby a process of electro-osmosis, increasing the alkalinity of the cover zone. At the same time, electrolysis at the reinforcement surface produces a high pH environment,which repassivates the steel…
    • Placeholder Image
      Read more
      • , ,

      • Patchroc

      • Patchroc is supplied as a pre-blended dry powder to which water is added to produce an easily trowellable mortar. Patchroc is a blend of inorganic cements, additives to modify and control the rate of setting and strength gain, with selected hard wearing aggregates. Patchroc does not contain calciumchloride. Patchroc has been designed for the patching of small areas of concrete…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc CF

      • Renderoc CF is a crack sealing/filling cementitious material in powder form. It is easy to apply and can be finished or smooth ened off with a putty blade or a damp sponge. It sets quickly on application and can be over coated with common paints / coatings.
    • Placeholder Image
      Read more
      • , ,

      • Renderoc FC

      • Renderoc FC is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious mortar. Renderoc FC exhibits excellent thermal compatibility with concrete, and is fully compatible with other Renderoc*†mortars and Dekguard*† protective coatings.
    • Placeholder Image
      Read more
      • , ,

      • Renderoc HB2

      • Renderoc HB2 is a light weight, cementitious, polymer modified repair mortar to provide high build properties as well as excellent resistance to chloride ions and the diffusion of acidic gases such as carbon dioxide. It contains special preblended cements, graded sands and chemical additives which thermally combine to provide a product that has excellent compatibility with concrete as well as…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc Plug

      • Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the addition of clean water at site to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc RG

      • Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrink repair micro concrete.The material is based on Portland cements, graded aggregates and fillers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc RG Spl

      • Renderoc RG Spl is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrink repair micro concrete.Th e material is based on Portland cements, graded aggregates and fillers, and additives which impart controlled expansion characteristic s in the plastic state, while minimising water demand. The low…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc RSXtra

      • Renderoc RSXtra is a blend of dry powders and graded aggreates which requires only the site additon of clean water to produce a highly consistent, high strength, free flowing repair concrete which self-compacts, Renderoc RSXtra exhibits excellent compatibility with concrete and good water repellent properties.
    • Placeholder Image
      Read more
      • , ,

      • Renderoc S2

      • Renderoc S2 is supplied as a grey powder along with a liquid polymer and has to be mixed with water on site to produce a highly consistent, high strength repair mortar. The material is based on carefully blended cement, graded fillers and chemical additives and is polymer modified to provide a mortar with good handling characteristics, while minimising water demand.…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc UW

      • Renderoc UW is supplied as a ready to use dry powder requiring only the addition of water to produce a free flowing,non shrink, repair material which exhibits exceptional resistance to 'washing out' of the cement phase when placedin stationary or moving water. The material is a mixture of specially processed cement, with carefully graded fine aggregate. Additives impart controlled expansion,…
    • Placeholder Image
      Read more
      • , ,

      • Superpatch

      • Superpatch mortar is supplied as a ready to use dry powder requiring only the addition of water to produce a high strength mortar with non shrink property. The material is a mixture of specially processed cement and carefully graded fine aggregate. Additives impart controlled expansion characteristics and reduce water necessary to produce cohesive mortar mix. The very low water/powder ratio…