Sealants

    • Placeholder Image
      Read more
      • , ,

      • Colpor 200

      • Fosroc Colpor 200 cold applied, two part polyurethanesealant is designed for joints in concrete paved areas. The capability of accommodating cyclic movements is retained by Colpor 200 throughout extremes of temperature conditions. Colpor 200 is resistant to fuel, oil and hydraulic fluid spillage,will not harden in cold weather nor become excessively soft or pick up in hot conditions. Colpor 200…
    • Placeholder Image
      Read more
      • , ,

      • Decofill

      • Decofill acrylic sealant is a white acrylic based gap filler in paste form for application from a cartridge. It is very quick and easy to apply and can be finished or smoothed off with a spatula or a damp sponge. It sets quickly on application and will accept paint or wallpaper finishes. Typical uses for Decofill acrylic sealant are gaps…
    • Placeholder Image
      Read more
      • , ,

      • Expancell

      • Expancell polyethylene foam back-up cords have the ability to perform several functions. They enable the correct width to depth ratio of the sealing slot to be maintained and provide a firm backing for the sealant to be tooled. This will precipitate wetting of the sides of the joint during the sealant application thus facilitating good adhesion The use of Expancell…
    • Placeholder Image
      Read more
      • , ,

      • Hydrocell XL

      • Hydrocell XL is a cross linked, semi-rigid, closed cell polyethylene sheet material used for forming or filling expansion joints between adjacent in-situ or precast components. Hydrocell XL provides excellent support backing to elastomeric sealants and is especially recommended for use in expansion joints in brickwork and in the construction of water retaining and water excluding structures.
    • Placeholder Image
      Read more
      • , ,

      • Nitoproof 120

      • Nitoproof 120 is based on selected bitumens that are blended together with non-asbestos reinforcing fibres to provide an outstanding liquid grade material used for intermediate thickness coating. When dry Nitoproof 120produces quality, high film build flexible bitumen coating.
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 200

      • Nitoseal 200 is a black two part pitch extended polysulphide based joint sealant which cures to form a low modulus durable and elastic seal. The material is self levelling and can be poured directly into horizontal joints. When cured, Nitoseal 200 forms a highly resilient seal which can accommodate large cyclic movements over a wide range of ambient temperatures. Used…
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 215(I)

      • Nitoseal 215(I) is a two-part, gun grade polysulphide sealant for filling and sealing joints in building construction. It is elastic, weather-resistant, non-sagging and water-tight without standing adhesion to practically all surfaces when used with the correct primer. Supplied in a composite pack containing the Base sealant and Hardener in pre-measured quantities. Colour : Grey
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 280

      • Nitoseal 280 two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers. The mixed sealant is self levelling and can be poured directly into horizontal joints to form a tough resilient seal possessing a limited degree offlexibility. Nitoseal 280 is available in a range of attractive colours with a separate colour pack providing visual mixing control.
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal MS600

      • Nitoseal MS600 is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistantelastomer. Conforms to the DWI Water Quality Regulations25(1)(b) for products having a small surface area in contact with water for public supply.
    • Placeholder Image
      Read more
      • , ,

      • Supercast SW10

      • Supercast SW 10 is a swellable water stop that can be installed and positively linked into conventional Supercast PVC waterstop networks This alows the use of Supercast PVC for expansion joints and Supercast SW10 for construction joints, all the time maintaining an intergrated network. Supercast SW10 is made from high performance syntheticel astomeric strips. The swelling action is the result…
    • Placeholder Image
      Read more
      • , ,

      • Supercast SW20

      • Water swellable - Basic Polymer - hydrophilic water stop,where shown on the drawings, shall be made from a preformed elastomeric strip which can integrate into existing water stop networks. It shall be free from rubber, bentonite or other inclusions. The water stop shall have an unrestrained volumetric expansion of upto 300%. It must not deteriorate under prolonged wet/dry cycling. It…
    • Placeholder Image
      Read more
      • , ,

      • Supercast SWX

      • Supercast SWX is a grey, elastomeric water-swellable paste which is applied like a sealant. The hydrophillic properties of Supercast SWX display good consistency in swell rate during repeated wet/dry cycling. Expansion of the product on contact with water creates a positive pressure against the faces of the concrete joint, thus preventing the passage of water.
    • Placeholder Image
      Read more
      • , ,

      • Thioflex 600

      • Thioflex 600 is a two part joint sealant based on a liquid polysulphide polymer. It is supplied as a 2.5 L pack containing a base component and curing agent in the correct proportions which, when mixed together, cure to form a toughrubber-like material. When cured, the sealant exhibits excellent adhesion to most surfaces including concrete, aluminium and stainless steel. Priming…