Construction Chemical

    • Placeholder Image
      Read more
      • , ,

      • Accelerator BMW

      • WATERPLUG (S) is a fast setting hydraulic compound stops running water instantly. WATERPLUG (S) sets in 1 to 3 minutes depending upon the temperature of mixing water and the surface to which it is applied. Lower temperature will retard the setting time and higher temperature accelerates the setting time.
    • Placeholder Image
      Read more
      • , ,

      • Auramix 350 DIS

      • Auramix 350 DIS is a unique combination of new generation su-per plasticizer based on polycarboxilic ether polymer with long lateral chain. Electrostatic dispersion mechanism considerably reduces the water demand in fl owable concrete. It is supplied as a light brown liquid, instantly dispersible in water. Auramix 350 DIS disperses the cement particles effectively in the concrete mix and hence exposes…
    • Placeholder Image
      Read more
      • , ,

      • Brushbond

      • Brushbond is a two component acrylic polymer modifiede lastomeric waterproofing membrane which consists of Brushbond powder and Nitobond BB acrylic emulsion. It requires only the addition of water on site and when mixed in the proper proportions, an easily brushable coating is produced. Brushbond can simply be applied by a stiff brush,or trowel to obtain the desired thickness. Brushbond powder…
    • Placeholder Image
      Read more
      • , ,

      • Brushbond RFX

      • Brushbond RFX is a two component acrylic polymer modified cementitious coating which consists of Brushbond RFX powder and Nitobond BBX acrylic emulsion. It requires only the addition of clean water at site to produce an easily brushable coating. Brushbond RFX can simply be applied by stiff brush,roller or trowel to obtain the desired thickness
    • Placeholder Image
      Read more
      • , ,

      • Brushbond Coolcoat

      • Brushbond Coolcoat is a water-based white coloured emulsion comprising of polymers and specially designed hollow “microspheres”, less than 100 microns in diameter with non conductive properties. These microspheres collectively acts as thermal insulation blanket covering the structure effectively reflecting solarradiation back into the atmosphere. This results in impressive temperature reduction behind the substrate
    • Placeholder Image
      Read more
      • , ,

      • Brushbond TGP

      • Brushbond TGP* crystalline capillary waterproofing system contains proprietary blend of portland cement, quartz aggregate and special chemicals. In the presence of moisture, the active chemicals in Brushbond TGP* crystalline waterproofing system penetrates concrete and react chemically with free lime to produce insoluble crystals. This crystalline growth reduces porosity by blocking capillaries and filling hairline non structural cracks ( upto 0.25mm…
    • Placeholder Image
      Read more
      • , ,

      • Brushbond TI Flexicoat

      • Brushbond TI Flexicoat is a water-based white colouredemulsion comprising of acrylic polymers and specially designed hollow “microspheres”, less than 100 microns indiameter with non conductive properties These microspheres collectively acts as thermal insulation blanket covering the structure effectively reflecting solar radiation back into the atmosphere. This results in impressive temperature reduction behind the substrate by a min. of 10oC. This…
    • Placeholder Image
      Read more
      • , ,

      • Cebex® 100

      • Cebex 100, a plasticised expanding grout admixture is supplied as a powder. The material is a combination of a plasticising agent and a gas producing expansion medium.The plastisicing agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and…
    • Placeholder Image
      Read more
      • , ,

      • Cebex® FCC422

      • Cebex FCC422 is supplied as a powder additive. The material is a combination of a plasticising agent, and a gas producing expansive medium, with suitable fillers; which generates gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. Stability and cohesion of grout are greatly increased. The selected fillers used…
    • Placeholder Image
      Read more
      • , ,

      • Cebex®200

      • Cebex 200 a plasticising and hydrogen free expansion grout admixture is supplied as a powder admixture. Cebex 200allows the use of a reduced water / cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.
    • Placeholder Image
      Read more
      • , ,

      • Cemtop® 250T

      • Cemtop 250T is a blend of specially selected cements,graded aggregates, polymers and set control additives. It is supplied as a dry, grey powder which requires only the addition of water to produce a smooth free flowing and self levelling material which can be laid to a feather edge. This provides an ideal fairing material for levelling uneven, in situ or…
    • Placeholder Image
      Read more
      • , ,

      • Cemtop® 400SD

      • Cemtop 400SD is a blend of selected cements, hard-wearinggraded aggregates modified with polymers and flow agents.It is supplied as a dry, grey powder which requires only the addition of water to produce a self smoothing, free flowing material. Cemtop 400SD may be applied by hand or by use of acontinuous mixer pump.
    • Placeholder Image
      Read more
      • , ,

      • Cemtop® HD

      • Cemtop HD is a blend of selected cements, graded aggregates, polymers and flow agents. It is supplied as a dry, grey powder which requires only the addition of water to produce a self smoothing, free flowing material. Cemtop HD may be applied either by hand, or via the use of a continuous mixer pump
    • Placeholder Image
      Read more
      • , ,

      • Colpor 200

      • Fosroc Colpor 200 cold applied, two part polyurethanesealant is designed for joints in concrete paved areas. The capability of accommodating cyclic movements is retained by Colpor 200 throughout extremes of temperature conditions. Colpor 200 is resistant to fuel, oil and hydraulic fluid spillage,will not harden in cold weather nor become excessively soft or pick up in hot conditions. Colpor 200…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra GP2

      • Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free lowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra GP3

      • Conbextra GP3 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses upto 100mm. Conbextra GP3 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra GPI

      • Conbextra GPI is supplied as a ready to use dry powder,requiring only the addition of water to produce a free-flowing,non-shrink grout. The material is blend of specially processedcement, pregraded fillers and additives which impart : Good early and final strengths due to very low waterr equirement„ Controlled expansion to retain the original volume filledeven after setting„ Free flow characteristics without…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® AT

      • Conbextra AT is supplied as a ready-to-use dry powder,requiring only the addition of water to produce a free flowingnon-shrink grout. The material is a blend of specially processed cement, pregraded fillers and additives which impart : High early and final strengths due to very low water requirement. Controlled expansion to retain the original volume filled even after setting Free flow…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® BPG

      • Conbextra BPG grout is supplied as a ready to use dry mixture. The addition of a controlled amount of clean water produces a pourable, non-shrink grout for bolt pockets up to1000mm depth. (Bolt pocket size 150 x 150). Conbextra BPG grout is a blend of Portland cement, graded fillers, graded coarse aggregates and chemical additives which impart controlled expansion in…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® Capsule

      • Conbextra Capsule is supplied as a ready to use dry powder encapsulated in a perforated skin, available in three grades- Fast, Medium and slow set. When required for use the capsule is submerged in water to allow sufficient water to be absorbed through the perforations to form a non-shrink, thixotropic cementitious grout.
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® EP300

      • Conbextra EP300 is a low exotherm material which is particularly suitable where long working time is needed; for large gaps (up to 300 mm) or for grouting at high ambient temperatures (up to 55°C). Conbextra EP300 is a three component system consisting of base resin, liquid hardener and specially graded inert fillers.
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® HES

      • Conbextra HES is supplied as a ready to use dry powder.The addition of a controlled amount of clean water producesa free flowing, non-shrink grout for gap thicknesses up to50mm. Conbextra HES is a blend of Portland cement, graded filler sand chemical additives which impart non shrink property whilst minimising water demand. The formulation ensures high early strength. The graded filler…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® HF

      • Conbextra HF is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free-flowing precision grout for gap thickness up to 125mm.In addition the low water requirement ensures high early strength and long term durability. Conbextra HF is a blend of portland cements, graded fillers and chemical additives which impart controlled…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® HR

      • Conbextra HR is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non shrink grout for applications in high temperature zones. Conbextra HR is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion,while minimising water demand. The product is designed to provide resistance…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra®UHS

      • Conbextra UHS is supplied as a ready-to-use dry powder,requiring only the addition of water to produce a free flowingnon-shrink grout. The material is a blend of specially processed cement, pre-graded fillers and additives which impart.„ High early and final strengths due to very low waterr equirement. „Controlled expansion to retain the original volume filledeven after setting.„ Free flow characteristics without…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra®UW

      • Conbextra UW is supplied as a ready to use dry powder requiring only the addition of water to produce a free flowing,non shrink, grout material which exhibits exceptional resistance to 'washing out' of the cement phase when placed in stationary or moving water. The material is a mixture of specially processed cement, with carefully graded fine aggregate. Additives impart controlled…
    • Placeholder Image
      Read more
      • , ,

      • Concure® WB

      • Concure WB is a white, low viscosity wax emulsion which incorporates a special alkali reactive emulsion breaking system. This system ensures that the emulsion breaks down to form a non penetrating continuous film immediately upon contact with a cementitious surface. This impervious film prevents excessive water evaporation which in turn permits more efficient cement hydration, thus reducing shrink age and…
    • Placeholder Image
      Read more
      • , ,

      • Concure®LP90

      • Concure LP90 concrete curing compound is polymer based continuous film forming curing compound and is supplied in various pigmented grades. Clear : Straw liquid curing to a clear film Blue : As clear grade but with blue fugitive dye Specific Gravity:0.82 - 0.85 When first applied to a fresh cementitious surface the product forms a continuous, non-penetrating coating. This coatingdries…
    • Placeholder Image
      Read more
      • , ,

      • Concure®LP90(M)

      • Concure LP90(M) concrete curing compound is polymer based continuous film forming curing compound and is supplied as aluminised polymeric resin solution drying to a silver film on application. Specific Gravity : 0.81 - 0.83 When first applied to a fresh cementitious surface the product forms a continuous, non-penetrating coating. This coating dries to a form a continuous film which provides…
    • Placeholder Image
      Read more
      • , ,

      • Conplast R*

      • Conplast R a brown chloride free liquid is based on a hydroxycarboxylic acid derivative which instantly disperses in water. Conplast R disperses the fine particles in the concrete mix,enabling the water content of the concrete to perform more effectively. This effect can be used to improve work ability, to increase ultimate strengths or to facilitate a reduction in the cement…
    • Placeholder Image
      Read more
      • , ,

      • Conplast SP440

      • Conplast SP440 is a blend of organic polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP440 has been specially formulated to give high water reductions upto 30% without loss of workability or to produce high quality concrete of reduced permeability
    • Placeholder Image
      Read more
      • , ,

      • Conplast® MS

      • Conplast MS supplied as a fine powder is added to the concrete mix early during the mixing process. The resultant low permeability concrete will exhibit improved mechanical properties, and increased resistance to the effects of chlorides, sulphates, gases, frost attack and alkali silica reaction.
    • Placeholder Image
      Read more
      • , ,

      • Conplast® P211

      • Conplast P211 is a chloride free water reducing admixture based on selected sugar-reduced lignosulphonates. It is supplied as a brown solution which instantly disperses in water. Conplast P211 disperses the fine particles in the concrete mix, enabling the water content of the concrete to perform more effectively and improving the consistency of the concrete. This produces higher levels of work…
    • Placeholder Image
      Read more
      • , ,

      • Conplast® P211(M)

      • Conplast P211(M) is a chloride free water reducing admixture based on selected sugar-reduced lignosulphonates. It is supplied as a brown solution which instantly disperses in water. Conplast P211(M) disperses the fine particles in the concrete mix, enabling the water content of the concrete to perform more effectively and improving the consistency of the concrete. This produces higher levels of work…
    • Placeholder Image
      Read more
      • , ,

      • Conplast® P505(B)

      • Conplast P505(B) is a chloride free and water reducing admixture based on selected sugar - reduced lignosulphonate materials. It is supplied as a brown solution which instantly disperses in water. Conplast P505(B) disperses the fine particles in the concrete mix, enabling the water content of the concrete to perform more effectively and improving the consistency of the concrete.This produces higher…
    • Placeholder Image
      Read more
      • , ,

      • Conplast® P509

      • Conplast P509 is a formulated blend of polymeric materials based on hydrolysed carbohydrate derivatives. It is designed to give maximum cement particle dispersion without producing unwanted side effects. This results in good, dense concrete having exceptionally high strength. Conplast P509 acts as a normal water reducing admixture at low to medium dosage rates. At higher dosages, it acts as are…
    • Placeholder Image
      Read more
      • , ,

      • Conplast® PA21(S)

      • Conplast PA21(S) is supplied as a dark brown liquid based on selected sugar reduced lignosulphonates in combination with compatible surface active agents. Conplast PA21(S) is a chloride free admixture used to entraina controlled volume of air in a concrete mix whilst permitting,through its plasticising action, significant reduction in the free water content of the mix. Conplast PA21(S) acts at the…
    • Placeholder Image
      Read more
      • , ,

      • Conplast® RP264

      • Conplast RP264 is a dark brown liquid based on selected lignosulphonates. When added to concrete mixes the admixture is absorbed onto the cement particles. It then acts as a dispersing agent which breaks down agglomerates of cement particles and enables the water in the mix to perform more efficiently. Conplast RP264 delays the initial hydration of the cement which results…
    • Placeholder Image
      Read more
      • , ,

      • Conplast® SD110

      • Conplast SD110 is a brown liquid which has been formulated for optimum performance as a cement saver under manufacturing conditions encountered in Concrete blocks. Improved formulation helps in both cement dispersion and compaction, maximising the strength obtained from the cement used.
    • Placeholder Image
      Read more
      • , ,

      • Conplast® SP337

      • Conplast SP337 is based on a blend of specially selected organic polymers. It is supplied as a dark brown liquid,instantly dispersible in water. Conplast SP337 disperses the cement particles effectively in the concrete mix and hence exposes a larger surface area to the hydration process. This effect is used either to increase the strength or to produce high work ability…
    • Placeholder Image
      Read more
      • , ,

      • Conplast® SP430

      • Conplast SP430 is based on Sulphonated Napthalene Polymers and supplied as a brown liquid instantly dispersible in water. Conplast SP430 has been specially formulated to give high water reductions up to 25% without loss of work ability or to produce high quality concrete of reduced permeability.
    • Placeholder Image
      Read more
      • , ,

      • Conplast® SP430(G1)

      • Conplast SP430(G1) is based on Sulphonated Napthalene Polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP430(G1) has been specially formulated to give high water reductions up to 25% without loss of work ability or to produce high quality concrete of reduced permeability.
    • Placeholder Image
      Read more
      • , ,

      • Conplast® SP430(S)

      • Conplast SP430(S) is based on Sulphonated Napthalene Polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP430(S) has been specially formulated to give high water reductions up to 25% without loss of work ability or to produce high quality concrete of reduced permeability.
    • Placeholder Image
      Read more
      • , ,

      • Conplast® SP430(SB)

      • Conplast SP430(SB) is based on Sulphonated Napthalene Polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP430(SB) has been specially formulated to give high water reductions up to 25% without loss of work ability or to produce high quality concrete of reduced permeability.
    • Placeholder Image
      Read more
      • , ,

      • Conplast® SP430A1

      • Conplast SP430A1 is based on Sulphonated Napthalene Polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP430A1 has been specially formulated to give high water reductions up to 25% without loss of work ability or to produce high quality concrete of reduced permeability.
    • Placeholder Image
      Read more
      • , ,

      • Conplast® SP430G8

      • Conplast SP430G8 is based on Sulphonated Napthalene Polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP430G8 has been specially formulated to give high water reductions up to 25% without loss of workability or to produce high quality concrete of reduced permeability.
    • Placeholder Image
      Read more
      • , ,

      • Conplast® SP432BS

      • Conplast SP432BS is based on Sulphonated Napthalene Polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP432BS has been specially formulated to give high water reductions up to 25% without loss of work ability or to produce high quality concrete of reduced permeability.
    • Placeholder Image
      Read more
      • , ,

      • Conplast® SP432MS

      • Conplast SP432MS is a chloride free, super plasticising admixture based on selected sulphonated napthalene polymers. It is supplied as a brown solution which instantly disperses in water. Conplast SP432MS disperses the fine particles in the concrete mix, enabling the water content of the concrete to perform more effectively. The very high levels of water reduction possible allow major increases in…
    • Placeholder Image
      Read more
      • , ,

      • Conplast® W

      • Conplast W is supplied as a brown liquid. When added to cementitious mixes it accelerates hydration and enables the water content to perform more efficiently by dispersing agglomerated cement particles. This further improves strength by enabling water reduction to be made at constant workability. Where there is embedded or prestressed steel, or wher esulphate resistant cement is used or when…
    • Placeholder Image
      Read more
      • , ,

      • Conplast® WL

      • Conplast WL is a dark brown liquid based on lignosulphonates which mixes readily with water and therefore disperses evenly. Conplast WL waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more efficient compared to traditional powder waterproofers as its use results in two…
    • Placeholder Image
      Read more
      • , ,

      • Conplast® WP400

      • Conplast WP400 chloride free admixture is supplied as a turbid liquid which instantly disperses in water. Conplast WP400 is an organic liquid which reacts with products of the cement hydration process to produce a hydrophobic material which repels external water, reducing absorption into the concrete.
    • Placeholder Image
      Read more
      • , ,

      • Conplast® X421IC

      • Conplast X421IC is a dark brown liquid based on lignosulphonates which mixes readily with water and therefore disperses evenly. Conplast X421IC waterproofs by improving the quality of theconcrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more efficient compared to traditional powder waterproofers as its use results in two fold…
    • Placeholder Image
      Read more
      • , ,

      • Conplast®AEA

      • Conplast AEA is a chloride free air entraining admixture basedon neutralised vinson resin. It is supplied as a translucentwater white coloured solution which instantly disperses inwater. Conplast AEA acts at the interface between the mixing waterand cement/aggregate particles to produce microscopic airbubbles, which are evenly distributed throughout the concrete.The entrained air enhances durability by providing protectionagainst the rapid temperature changes…
    • Placeholder Image
      Read more
      • , ,

      • Conplast®M1

      • Conplast M1 chloride free superplasticising admixture isbased on sulphonated melamine polymers. It is suppliedas a clear solution which instantly disperses in water. Conplast M1 disperses the fine particles in the concrete mix,enabling the water content of the concrete to perform moreeffectively. The very high levels of water reduction possibleallow major increases in strength to be obtained.
    • Placeholder Image
      Read more
      • , ,

      • Conplast®SP430A2

      • Conplast SP430A2 is based on Sulphonated Napthalene Polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP430A2 has been specially formulated to give high water reductions up to 25% without loss of work ability or to produce high quality concrete of reduced permeability.
    • Placeholder Image
      Read more
      • , ,

      • Conplast®SP500

      • Conplast SP500 is based on Sulphonated Napthalene Polymers and is supplied as a brown liquid instantly dispersible in water. Conplast SP500 has been specially formulated to give high water reductions upto 25% without loss of workability or to produce high quality concrete of reduced permeability
    • Placeholder Image
      Read more
      • , ,

      • Decofill

      • Decofill acrylic sealant is a white acrylic based gap filler in paste form for application from a cartridge. It is very quick and easy to apply and can be finished or smoothed off with a spatula or a damp sponge. It sets quickly on application and will accept paint or wallpaper finishes. Typical uses for Decofill acrylic sealant are gaps…
    • Placeholder Image
      Read more
      • , ,

      • Dekguard S

      • Dekguard S system comprises of a single component,penetrating silane/silaxone primer and a single component pigmented coating, both ready for immediate site use. The primer, Dekguard primer is supplied as a clear liquid and is based on a silane/silaxone blend dissolved in a penetrating organic carrier. The primer is reactive and capable of producing a chemically bound hydrophobic barrier,thus inhibiting the…
    • Placeholder Image
      Read more
      • , ,

      • Dekguard S300

      • Dekguard S300 system comprises of a single component,silane/silaxone primer followed by a two component polymer under coat, over coated with a single component pigmentedaliphatic top coat. The primer, Dekguard primer is supplied as a clear liquid and is based on a silane/silaxone blend dissolved in a penetrating organic carrier. The primer is reactive and capable of producing a chemically bound…
    • Placeholder Image
      Read more
      • , ,

      • Eucoplacant 721

      • Eucoplacant 721 is particularly suitable for self compacting concrete applications. It gives excellent stability to hydraulicbinder based materials. Eucoplacant 721 limits bleeding,segregation and sedimentation of concrete, mortars and grouts. In particular, it makes possible to manufacture concrete with high fluidity being able to be placed by gravity, without anymeans of vibration. The addition of VMA allows to obtain concrete with…
    • Placeholder Image
      Read more
      • , ,

      • Expancell

      • Expancell polyethylene foam back-up cords have the ability to perform several functions. They enable the correct width to depth ratio of the sealing slot to be maintained and provide a firm backing for the sealant to be tooled. This will precipitate wetting of the sides of the joint during the sealant application thus facilitating good adhesion The use of Expancell…
    • Placeholder Image
      Read more
      • , ,

      • Exposeal UW

      • Exposeal UW is a thixotropic, solvent free, two component compound based on water insensitive epoxy resins, inertfillers and thixotropic agents designed for applying in dampand submerged conditions. It is applied directly to concretefor filling cracks, blow holes etc., which cures to form a strong seal.
    • Placeholder Image
      Read more
      • , ,

      • Fosroc Nitocote CM210

      • Nitocote CM210 two-component polymer modified cementitious coating is supplied in a pre-packaged form. The product has been designed to be easily mixed on-site using a slow speed drill and paddle and then applied to the substrate using a brush, roller, trowel or by spray application. Nitocote CM210, available in grey and white, cures to form a flexible impermeable membrane.
    • Placeholder Image
      Read more
      • , ,

      • Fosroc Polyurea WPE

      • Fosroc Polyurea WPE is a spray-applied, 100% solids, flexible, two-component, rapid curing pure Polyurea system, designed as a waterproofing and protective coating. It combines the advantages of seamless coating with very long life cycles and high durability. Fosroc Polyurea WPE consists of the two components Fosroc Polyurea WPE Part A ISO and Fosroc Polyurea WPE Part B AMINE. The system…
    • Placeholder Image
      Read more
      • , ,

      • Fosroc Renderoc HSXtra

      • Renderoc HSXtra is supplied as a ready to use blend of dry powders, which requires only the addition of clean water to produce a highly consistent, repair mortar suitable for structural concrete and masonry repairs. Renderoc HSXtra may be hand applied or sprayed with suitable equipment, please see application method statement for details.
    • Placeholder Image
      Read more
      • , ,

      • Fosroc Renderoc LA

      • Renderoc LA is supplied as a ready to use blend of dry powders requiring only the site addition of clean water to produce a free-flowing, shrinkage compensated micro-concrete suitable for large volume concrete repairs at nominal thicknesses in excess of 50 mm. The material is based on Portland cement, graded aggregates and additives which impart controlled expansion in both the…
    • Placeholder Image
      Read more
      • , ,

      • Galvashield CC

      • Galvashield CC galvanic anodes are used to control on-going corrosion and to prevent the initiation of new corrosion activity in reinforced concrete structures. Galva shield CC consists of a sacrificial zinc core activated within a specially formulated cementitious mortar. The cylindrical unit, available in a varietyof standard sizes, is quickly and easily installed into concrete that is mechanically sound but…
    • Placeholder Image
      Read more
      • , ,

      • Galvashield LJ

      • Galvashield LJ is designed to provide a cost effective, reliable method of reinstating and Cathodically Protecting severely exposed reinforced concrete / structural steel elements.Galvashield LJ is composed of a prefabricated fibre glass jacket lined with expanded zinc mesh conforming to ASTMB69-01a for A190 alloy. The zinc mesh is connected to the steel reinforcement to provide the required protective currentto the…
    • Placeholder Image
      Read more
      • , ,

      • Galvashield XP

      • Galvashield XP embedded galvanic anodes are used inconcrete rehabilitation to prevent the formation of new corrosion sites on adjacent rebar. The anode consists of a sacrificialzinc core activated within a specially formulated cementitious mortar. The XP unit is fixed to the reinforcing steel by means of tie wires, which allow attachment in horizontal, vertical and overhead locations. Once installed, the…
    • Placeholder Image
      Read more
      • , ,

      • Hydrocell XL

      • Hydrocell XL is a cross linked, semi-rigid, closed cell polyethylene sheet material used for forming or filling expansion joints between adjacent in-situ or precast components. Hydrocell XL provides excellent support backing to elastomeric sealants and is especially recommended for use in expansion joints in brickwork and in the construction of water retaining and water excluding structures.
    • Placeholder Image
      Read more
      • , ,

      • Lokfix

      • The three versions of Lokfix polyester resin grout are all pre-measured, two part, filled polyster resin grouts. After hardening the grout produces anchorages of consistent reproducible values. The versions are : Lokfix L is used where hole diameter exceeds bar diameter by 25 to 50mm. Lokfix S is used where the difference between the holediameter and bar diameter is <…
    • Placeholder Image
      Read more
      • , ,

      • Nitobond AR

      • Nitobond AR is a modified acrylic emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications. Nitobond AR is the recommended primer for the Fosroc cementitious repair system.
    • Placeholder Image
      Read more
      • , ,

      • Nitobond AR(M)

      • Nitobond AR(M) is a modified acrylic emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications. Nitobond AR(M) is the recommended primer for the Fosroc cementitious repair system.
    • Placeholder Image
      Read more
      • , ,

      • Nitobond EP

      • Nitobond EP is based on solvent free epoxy resins containing pigments and fine fillers. It is supplied as a two part material in pre weighed quantities for ready onsite mixing and use. Coloured components - white base and green hardener -provide visual evidence that adequate mixing is achieved.
    • Placeholder Image
      Read more
      • , ,

      • Nitobond PC

      • Nitobond PC thixotropic epoxy adesive is a 2 pack solvent free epoxy resin system consisting of a white base and black hardener in pre weighed quantities for easy onsite mixing.The product is available in three grades :„ Nitobond PC 20 - Fast set for application between 50C to200 C „Nitobond PC 30 - Medium Fast set for application between1 50C…
    • Placeholder Image
      Read more
      • , ,

      • Nitocote EP405

      • Nitocote EP405 is a two pack, solvent free, epoxy resin material. It is supplied in pre-measured quantities ready for site mixing and use. The material cures to provide a smooth,hygienic and tough finish which is suitable for contact with potable water and foodstuffs. It is available in blue and white colours.
    • Placeholder Image
      Read more
      • , ,

      • Nitocote EP410

      • Nitocote EP410 high build surface protective coating is based on solvent free epoxy resins specially formulated to provide athixotropic coating suitable for application to vertical surfaces.It cures to form a smooth hygienic film with good resistance to a wide range of mineral and organic acids, alkalis, fats and oils. Colour : Green ( Non-stable)
    • Placeholder Image
      Read more
      • , ,

      • Nitocote ET402

      • Nitocote ET402 is based on solvent-free epoxy resins,modified with coal tar. It is supplied as a two pack material inpre-weighed quantities ready for on-site mixing and use. Nitocote ET402 is applied as a two coat application. It is generally applied at a wet film thickness of 200 micron per coat, but can be applied at greater thicknesses to suit exposure…
    • Placeholder Image
      Read more
      • , ,

      • Nitocote ET402

      • Nitocote ET402 is based on solvent-free epoxy resins, modified with coal tar. It is supplied as a two pack material in pre-weighed quantities ready for on-site mixing and use. Nitocote ET402 is applied as a two coat application. It is generally applied at a wet film thickness of 200 micron percoat, but can be applied at greater thicknesses to suit…
    • Placeholder Image
      Read more
      • , ,

      • Nitofill UR63

      • Nitofill UR63 is a two part liquid polyurethane. When mixed in the proportion supplied they react to form a tough, slightly flexible resin. Nitofill UR63 has a good adhesion to concrete and masonry and when injected into cracks it allows some movement without loss of bond.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor TF30

      • Nitoflor TF30, is a three part solvent-free combination of epoxyresin, modified amine hardeners filled with specially graded and selected high crushing strength, chemically inert aggregates. It is laid by trowel at approximately 3-6 mm thickness depending on the requirement. It is highly chemical and abrasion resistant. The system includes Nitoprime 25 a two pack epoxy resin primer . Nitoflor TF30…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor TF5000

      • Nitoflor TF5000 is a three part solvent-free combination of epoxy resin, modified amine hardeners filled with specially graded and selected high crushing strength, chemically inert aggregates. It is laid by trowel as a durable chemical resistant screed at 3to 6 mm thickness depending on the requirement. This nominal thickness provides an impervious topping which is highly chemical resistant by the…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor TF5050

      • Nitoflor TF5050 is a four-component water miscible epoxyscreed system, based on new generation epoxy resin technology, supplied in pre-weighed packs ready for on-sitemixing and use. The cured screed forms a hard, matt and water vapour permeable seal to concrete. This permeability allows it to beapplied on damp substrates and green concrete
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor TS5000

      • The Nitoflor TS5000, is a three part solvent free combination of epoxy resin, modified amine hardeners filled with specially graded and selected high crushing strength, heavy density aggregates. Nitoflor TS5000 durable abrasion resistant screed is laid by trowel at 3 to 6 mm thickness depending on the requirement. The system includes Nitoprime 25, two part primer. NitoflorTS5000 screed and Nitoprime…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor Uragard CR

      • Nitoflor Uragard CR is a polyurethane based hybrid floor screed designed for use at thickness between 5 mm and 10mm. The product is formulated specifically to with stand chemical attack. The product is supplied as a four-component system (including colour pack), pre-weighed for on-site mixing.Standard colours include brick red, dark grey, green (RAL6032)and blue (RAL5012).
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor Uragard CR400

      • Nitoflor Uragard CR400 is a solvent free system based on polyurethane resins and curing agents specially selected for their ability to withstand chemical attack. The system consists of pre-weighed base & hardener components and a Nitoflor colour pack, all of which contain reactive elements that areessential to the installation of the system. A slip resistant texture can be provided by…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor Uragard SL

      • Nitoflor Uragard SL is a polyurethane based self levelling system designed for application depth of 6mm or greater.The system is formulated specifically to withstand thermal shocks, freeze/thaw cycles and chemical attack. The product is supplied as a four-component system (including colour pack), pre-weighed for on-site mixing. Standard colours include brick red, grey and mid green.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor Uragard TF

      • Nitoflor Uragard TF is a polyurethane based floor screed designed for use at thickness between 5 mm and 12 mm.The product is formulated specifically to withstand thermal shock, freeze/thaw cycles and chemical attack. The product is supplied as a four-component system (including colour pack), pre-weighed for on-site mixing. Standard colours include brick red, grey and mid green.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® CC100

      • Nitoflor CC100 is a two component polyurethane floor coating.The cured product forms a pigmented,conductive coat with a surface resistance of 5 x 104 - 1 x 106 Ohm, for epoxy or polyurethane floors. Colours Nitoflor CC100 can be supplied only in silver grey. Please contact Fosroc.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® DS5000

      • Nitoflor DS5000 is a three part solvent-free combination of epoxy resin modified amine hardeners filled with specially coloured and selected high crushing strength, chemicallyinert aggregates. Nitoflor DS5000 is laid by trowel at 3-5mm thickness depending on the requirement. The system includes Nitoprime 25, two part primer. Nitoflor DS5000 is supplied inpreweighed units ready for on site mixing and application.The finished…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® ET Slurry

      • Nitoflor ET Slurry, a three component system is based on coal tar modifed epoxy resins, amine curing agents and chemically inert, graded silica fillers which when mixed forms a fluid, homogenous slurry. The components of Nitoflor ET Slurry system are supplied inpreweighed quantities ready to use on site.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® EU5

      • Nitoflor EU5 consists of special resins and graded aggregates formulated to withstand chemical attack and impact shock. The product is supplied as a 3 component system comprising resin base, resin hardener and fillers.When correctly laid Nitoflor EU5 will provide a surface ready to receive applications of other Fosroc flooring systems.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® FC110

      • Nitoflor FC110 is a two part, polyurethane system. It has excellent adhesion to cementitious surfaces and when cured,forms a semigloss flexible film. It penetrates the surface to bind together the particles to produce a hardwearing and impermeable surface. It is supplied in two parts and requires mixing on site.
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® FC140

      • Nitoflor FC140 is a three component solvent based, epoxyresin coating system supplied in pre-weighed packs ready for on-site mixing and use The cured film forms a hard but flexible coating with excellent adhesion to clean concrete, sand/cement and granolithicscreeds, and certain metal surfaces. It cures to a semi-gloss,impervious finish which is easily cleaned. The product is available in a range…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® FC145

      • Nitoflor FC145 is a three-component high solids, epoxy resincoating system supplied in pre-weighed packs ready foron-site mixing and use. The cured film forms a hard, durable, coating with excellent adhesion to clean concrete, sand/cement and granolithicscreeds, and certain metal surfaces. It cures to semi-glos simpervious finish which is easily cleaned. The product is available in a wide range of colours…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® FC150

      • Nitoflor FC150 is a solvent free system based on epoxy resinsand curing agents specially selected for their ability to with stand chemical attack. The system consists of pre-weighed base & hardener components and a Nitoflor colour pack, all of which contain reactive elements that are essential to the installation of the system. A slip resistant texture can be provided by…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® FC550

      • Nitoflor FC550 is a four-component water miscible epoxy resincoating system, based on new generation epoxy resin technology, supplied in pre-weighed packs ready for on-sitemixing and use. The cured film forms a hard, matt and water vapour permeableseal to concrete. This permeability allows it to be applied on damp substrates and green concrete. The product is available in a wide range…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® Hardtop & Standard

      • Nitoflor Hardtop / Nitoflor Hardtop Standard are quality controlled, factory blended powder which are ready to use onsite. They contain special hardwearing aggregates which have been selected for abrasion and wear resistant propertiesas well as shape and size. These latter considerations,together with the use of high performance workability admixtures, produces a material which is easy to trowel into the surface…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® Levelcrete

      • Nitoflor Levelcrete is a blend of specially selected cements,graded aggregates, polymers and additives. It is supplied asa dry, grey powder which requires only the addition of water to produce a free fluid material. This provides an ideal levelling material for levelling uneven, in situ or precast concrete floors. Nitoflor Levelcrete has been specifically formulated to enable it to be applied…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® SL2050

      • Nitoflor SL2050 is a four-component, self-levelling, water miscible epoxy resin floor topping, based on new generation epoxy resin technology, supplied in pre-weighed packs ready for on-site mixing and use. The cured film forms a hard, matt and water vapour permeableseal to concrete. This permeability allows it to be applied on damp substrates and green concrete. The product is available in…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® SLW

      • Nitoflor SLW is water based with a special blend of selected epoxy resins, curing agents and graded inert aggregates which, when mixed, provides a 1.5 - 3mm epoxy resin floor topping with unique laying properties. The materials are supplied in pre weighed packs ready to mix and use on site. The system includes a two part epoxy resin primer, NitoprimeXG,…
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar 30

      • Nitomortar 30 is a three part solvent free combination of epoxyresin, modified amine hardeners filled with specially graded chemically inert aggregates with high crushing strength. It is applied by trowel as a durable chemical resistant repair mortar 3-6 mm thick depending upon the requirement. The system includes Nitoprime 25 a two part epoxy resin primer and Nitomortar 30 which are…
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar FC

      • Nitomortar FC is a two component thixotropic, solvent free,compound based on epoxy resins, graded fillers and thixotropic agents. It is applied directly to concrete substrates,without primer, and cures to a surface ready for over coating.The base component is light grey coloured and the hardener black to ease identification of uniform mixing.
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar PE

      • Nitomortar PE products are based on a polyester resin system. There are two grades: Nitomortar PE - for general purpose use Nitomortar PE Concrete - a special grade allowing users to add suitable aggregate, thereby substantially reducing the cost of infilling larger voids. Winter versions of both products are available which are faster setting at low ambient temperatures. Both grades…
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar S

      • Nitomortar S is based on a high quality solvent-free epoxyresin system. The special silica aggregates provide high strength and excellent abrasion resistance. Nitomortar S is a three - component material supplied in pre-weighed quantities ready for on-site mixing and use.
    • Placeholder Image
      Read more
      • , ,

      • Nitoproof 100/120

      • Nitoproof 100 and 120 are based on raw materials which are amongst the most water and water-vapour resistant surface coating materials available. They are also resistant to a wide range of chemical attack. Specially selected bitumens are blended to produce various grades, each designed to provide the best possible protectivecoating for its practical purpose. Nitoproof 120 incorporates fibres which give…
    • Placeholder Image
      Read more
      • , ,

      • Nitoproof 120

      • Nitoproof 120 is based on selected bitumens that are blended together with non-asbestos reinforcing fibres to provide an outstanding liquid grade material used for intermediate thickness coating. When dry Nitoproof 120produces quality, high film build flexible bitumen coating.
    • Placeholder Image
      Read more
      • , ,

      • Nitoproof 600

      • Nitoproof 600 single component pitch modified polyurethanecures by reaction with atmospheric moisture to give a toughelastomeric waterproof membrane. It is supplied in a single grade to meet all site application methods and requirements. Nitoproof 600 is a medium viscosity grade (approximately 600 poise) for roller, squeegee or spray application to horizontal and vertical surfaces.
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 200

      • Nitoseal 200 is a black two part pitch extended polysulphide based joint sealant which cures to form a low modulus durable and elastic seal. The material is self levelling and can be poured directly into horizontal joints. When cured, Nitoseal 200 forms a highly resilient seal which can accommodate large cyclic movements over a wide range of ambient temperatures. Used…
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 215(I)

      • Nitoseal 215(I) is a two-part, gun grade polysulphide sealant for filling and sealing joints in building construction. It is elastic, weather-resistant, non-sagging and water-tight without standing adhesion to practically all surfaces when used with the correct primer. Supplied in a composite pack containing the Base sealant and Hardener in pre-measured quantities. Colour : Grey
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 280

      • Nitoseal 280 two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers. The mixed sealant is self levelling and can be poured directly into horizontal joints to form a tough resilient seal possessing a limited degree offlexibility. Nitoseal 280 is available in a range of attractive colours with a separate colour pack providing visual mixing control.
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal MS600

      • Nitoseal MS600 is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistantelastomer. Conforms to the DWI Water Quality Regulations25(1)(b) for products having a small surface area in contact with water for public supply.
    • Placeholder Image
      Read more
      • , ,

      • Nitotile Grout

      • Nitotile Grout is a blend of specially selected cements, fillers and synthetic organic polymers. When added to water it readily blends to produce a smooth creamy paste which when set is water and mould resistant. Nitotile Grout is used in conjunction with Nitotile* tile adhesives.
    • Placeholder Image
      Read more
      • , ,

      • Nitotile GTA

      • Prepacked product requiring only direct mixing at site„ High adhesive bond strength - Ideal for vertical and horizontal applications of granite, marble, etc. „Excellent grab during open time„ Quick fixing - Reduces labour costs„ Can be used in the interior and exterior of buildings
    • Placeholder Image
      Read more
      • , ,

      • Nitowrap EP(CF)

      • Nitowrap EP(CF) is a carbon fibre composite wrapping system where Nitowrap (CF) is used in conjunction with an epoxy sealer cum primer, Nitowrap 30 and a high build epoxysaturant Nitowrap 410. The system is protected by a polyurethane top coat of Nitowrap 512 in case of atmospherically exposed structures
    • Placeholder Image
      Read more
      • , ,

      • Nitowrap EP(GF)

      • Nitowrap EP(GF) is a glass fibre composite wrapping system where Nitowrap GF is used in conjunction with an epoxy sealercum primer, Nitowrap 30, and a high build epoxy saturant Nitowrap 410. The system is protected by a polyurethane topcoat of Nitowrap 512 in case of atmospherically exposed structures.
    • Placeholder Image
      Read more
      • , ,

      • Norcure Chloride Extraction

      • Chloride extraction is carried out by applying a regulated current in order to create a safe electric field between the reinforcement in the concrete and a temporary, externally mounted anode mesh. During the treatment negatively charged chloride ions are driven from the concrete by an induced positive/negative field effect. Concurrent to the chloride ion removal process, electrolysis at the reinforcement…
    • Placeholder Image
      Read more
      • , ,

      • Norcure Realkalisation

      • Realkalisation is carried out by applying a safe electric current between the reinforcement in the concrete and a temporary,externally mounted anode mesh. During treatment, analkaline electrolyte solution is transported into the concreteby a process of electro-osmosis, increasing the alkalinity of the cover zone. At the same time, electrolysis at the reinforcement surface produces a high pH environment,which repassivates the steel…
    • Placeholder Image
      Read more
      • , ,

      • Patchroc

      • Patchroc is supplied as a pre-blended dry powder to which water is added to produce an easily trowellable mortar. Patchroc is a blend of inorganic cements, additives to modify and control the rate of setting and strength gain, with selected hard wearing aggregates. Patchroc does not contain calciumchloride. Patchroc has been designed for the patching of small areas of concrete…
    • Placeholder Image
      Read more
      • , ,

      • Proofex Torchseal 3P & 4P®

      • Proofex Torchseal 3P and 4P are quality torch applied APP based membranes manufactured from premium grade heavily modified bitumen, reinforced with a core of non-woven polyester fabric, weighing 180g/m², rot-proof and is malleable. The core gives the membrane its excellent mechanical properties, allows for good elongation and affords high resistance to piercing. Proofex Torchseal 3P and 4P membranes are ideal…
    • Placeholder Image
      Read more
      • , ,

      • Reebol®

      • Reebol is specially formulated blend of mineral oils and chemicals having release properties which are superior to those of a conventional mould oil. The chemicals react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould, thereby enabling easy striping from concrete and acting as a protection to steel and wooden…
    • Placeholder Image
      Read more
      • , ,

      • Reebol® Emulsion

      • Rainfall : It is necessary to protect freshly coated form work from rain which may dilute the emulsion before it has dried.After drying the coating will withstand an occasional lighty shower but may be affected by heavy or continuous rain. In such cases, a further coat is advised once surfaces have dried out thoroughly. De-moulding : De-moulding can be carried…
    • Placeholder Image
      Read more
      • , ,

      • Reebol® Emulsion Xtra

      • Reebol Emulsion Xtra is supplied as a pale amber liquid which turns white when diluted with water to produce a chemical release agent, combining the outstanding release properties of such materials with the economy of a conventional oil. It reacts with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which…
    • Placeholder Image
      Read more
      • , ,

      • Reebol® Std

      • Reebol Std is specially formulated blend of mineral oils and chemicals having release properties which are superior to those of a conventional mould oil. The chemicals react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould, thereby enabling easy striping from concrete and acting as a protection to steel and…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc CF

      • Renderoc CF is a crack sealing/filling cementitious material in powder form. It is easy to apply and can be finished or smooth ened off with a putty blade or a damp sponge. It sets quickly on application and can be over coated with common paints / coatings.
    • Placeholder Image
      Read more
      • , ,

      • Renderoc FC

      • Renderoc FC is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious mortar. Renderoc FC exhibits excellent thermal compatibility with concrete, and is fully compatible with other Renderoc*†mortars and Dekguard*† protective coatings.
    • Placeholder Image
      Read more
      • , ,

      • Renderoc HB2

      • Renderoc HB2 is a light weight, cementitious, polymer modified repair mortar to provide high build properties as well as excellent resistance to chloride ions and the diffusion of acidic gases such as carbon dioxide. It contains special preblended cements, graded sands and chemical additives which thermally combine to provide a product that has excellent compatibility with concrete as well as…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc Plug

      • Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the addition of clean water at site to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc RG

      • Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrink repair micro concrete.The material is based on Portland cements, graded aggregates and fillers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc RG Spl

      • Renderoc RG Spl is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrink repair micro concrete.Th e material is based on Portland cements, graded aggregates and fillers, and additives which impart controlled expansion characteristic s in the plastic state, while minimising water demand. The low…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc RSXtra

      • Renderoc RSXtra is a blend of dry powders and graded aggreates which requires only the site additon of clean water to produce a highly consistent, high strength, free flowing repair concrete which self-compacts, Renderoc RSXtra exhibits excellent compatibility with concrete and good water repellent properties.
    • Placeholder Image
      Read more
      • , ,

      • Renderoc S2

      • Renderoc S2 is supplied as a grey powder along with a liquid polymer and has to be mixed with water on site to produce a highly consistent, high strength repair mortar. The material is based on carefully blended cement, graded fillers and chemical additives and is polymer modified to provide a mortar with good handling characteristics, while minimising water demand.…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc UW

      • Renderoc UW is supplied as a ready to use dry powder requiring only the addition of water to produce a free flowing,non shrink, repair material which exhibits exceptional resistance to 'washing out' of the cement phase when placedin stationary or moving water. The material is a mixture of specially processed cement, with carefully graded fine aggregate. Additives impart controlled expansion,…
    • Placeholder Image
      Read more
      • , ,

      • Setrelease

      • SETRELEASE is supplied as a pale amber liquid which turns white when diluted with water to produce a chemical release agent, combining the outstanding release properties of such materials with the economy of a conventional oil. It reacts with the alkali in the concrete to form a thin water repellent layer on the surface of the mould which enables easy…
    • Placeholder Image
      Read more
      • , ,

      • Sidcure WC

      • SIDCURE WC is supplied as a white pigmented, non satiny, non toxic aqueous solution which when applied to fresh concrete surfaces, reacts with free lime and seals the pores, thus reducing the evaporation of water from the mix which assists curing process. Applied surfaces can be easily identified due to white pigment. Only single coat is sufficient for complete curing…
    • Placeholder Image
      Read more
      • , ,

      • Sidtop STD

      • SIDTOP STD is supplied as a ready to use factory controlled, dry shake cementitious system blended with special aggregates, selected for high abrasion and wear resistance and additives. SIDTOPSTD is used to obtain adense, tough, abrasion resistant industrial floor with non dusty and nonslip characteristics.
    • Placeholder Image
      Read more
      • , ,

      • Structuro® 100

      • Structuro 100 is differentiated from conventional super plasticisers in that it is based on a unique carboxylicether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in flowable concrete. Structuro 100 combines…
    • Placeholder Image
      Read more
      • , ,

      • Structuro® 100(M)

      • Structuro 100(M) is differentiated from conventional super plasticisers in that it is based on a unique carboxylicether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in flowable concrete. Structuro 100(M) combines…
    • Placeholder Image
      Read more
      • , ,

      • Structuro® 480

      • Advantages„ Particularly adapted to the production of self-compactingconcrete. „Provides hydraulic binder-based material excellent stability,opposes sweating, segregation and sedimentation intreated concrete„ Results in concrete with a high level of fluidity that can bepoured and placed by gravity avoiding the need of vibration.For horizontal applications, only a simple 'adjustment' with a beam is necessary. „Results in high quality facing without the nuisances…
    • Placeholder Image
      Read more
      • , ,

      • Structuro® 485

      • Advantages„ Useful in bleed control of concrete mix.„ Particularly adapted to the production of self compacting concrete.„ Provides hydraulic binder-based material excellent stability, opposes sweating, segregation and sedimentation in treated concrete „Results in concrete with a high level of fluidity that can bepoured and placed by gravity avoiding the need of vibration.For horizontal applications, only a simple 'adjustment' with a…
    • Placeholder Image
      Read more
      • , ,

      • Supercast SW10

      • Supercast SW 10 is a swellable water stop that can be installed and positively linked into conventional Supercast PVC waterstop networks This alows the use of Supercast PVC for expansion joints and Supercast SW10 for construction joints, all the time maintaining an intergrated network. Supercast SW10 is made from high performance syntheticel astomeric strips. The swelling action is the result…
    • Placeholder Image
      Read more
      • , ,

      • Supercast SW20

      • Water swellable - Basic Polymer - hydrophilic water stop,where shown on the drawings, shall be made from a preformed elastomeric strip which can integrate into existing water stop networks. It shall be free from rubber, bentonite or other inclusions. The water stop shall have an unrestrained volumetric expansion of upto 300%. It must not deteriorate under prolonged wet/dry cycling. It…
    • Placeholder Image
      Read more
      • , ,

      • Supercast SWX

      • Supercast SWX is a grey, elastomeric water-swellable paste which is applied like a sealant. The hydrophillic properties of Supercast SWX display good consistency in swell rate during repeated wet/dry cycling. Expansion of the product on contact with water creates a positive pressure against the faces of the concrete joint, thus preventing the passage of water.
    • Placeholder Image
      Read more
      • , ,

      • Superpatch

      • Superpatch mortar is supplied as a ready to use dry powder requiring only the addition of water to produce a high strength mortar with non shrink property. The material is a mixture of specially processed cement and carefully graded fine aggregate. Additives impart controlled expansion characteristics and reduce water necessary to produce cohesive mortar mix. The very low water/powder ratio…
    • Placeholder Image
      Read more
      • , ,

      • Thioflex 600

      • Thioflex 600 is a two part joint sealant based on a liquid polysulphide polymer. It is supplied as a 2.5 L pack containing a base component and curing agent in the correct proportions which, when mixed together, cure to form a toughrubber-like material. When cured, the sealant exhibits excellent adhesion to most surfaces including concrete, aluminium and stainless steel. Priming…
    • Placeholder Image
      Read more
      • , ,

      • Trafficguard UR150

      • Trafficguard UR150 is a multi-layer deck protection system comprising a primer and flexible Top Coat. All components are applied in the liquid phase and react chemically to forma tough, flexible, waterproof protective surface. Trafficguard UR150 is available in a range of standard colours. Contact your local Fosroc office for full details.