Construction Chemical

    • Placeholder Image
      Read more
      • , ,

      • Nitoproof 100/120

      • Nitoproof 100 and 120 are based on raw materials which are amongst the most water and water-vapour resistant surface coating materials available. They are also resistant to a wide range of chemical attack. Specially selected bitumens are blended to produce various grades, each designed to provide the best possible protectivecoating for its practical purpose. Nitoproof 120 incorporates fibres which give…
    • Placeholder Image
      Read more
      • , ,

      • Nitoproof 120

      • Nitoproof 120 is based on selected bitumens that are blended together with non-asbestos reinforcing fibres to provide an outstanding liquid grade material used for intermediate thickness coating. When dry Nitoproof 120produces quality, high film build flexible bitumen coating.
    • Placeholder Image
      Read more
      • , ,

      • Nitoproof 600

      • Nitoproof 600 single component pitch modified polyurethanecures by reaction with atmospheric moisture to give a toughelastomeric waterproof membrane. It is supplied in a single grade to meet all site application methods and requirements. Nitoproof 600 is a medium viscosity grade (approximately 600 poise) for roller, squeegee or spray application to horizontal and vertical surfaces.
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 200

      • Nitoseal 200 is a black two part pitch extended polysulphide based joint sealant which cures to form a low modulus durable and elastic seal. The material is self levelling and can be poured directly into horizontal joints. When cured, Nitoseal 200 forms a highly resilient seal which can accommodate large cyclic movements over a wide range of ambient temperatures. Used…
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 215(I)

      • Nitoseal 215(I) is a two-part, gun grade polysulphide sealant for filling and sealing joints in building construction. It is elastic, weather-resistant, non-sagging and water-tight without standing adhesion to practically all surfaces when used with the correct primer. Supplied in a composite pack containing the Base sealant and Hardener in pre-measured quantities. Colour : Grey
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 280

      • Nitoseal 280 two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers. The mixed sealant is self levelling and can be poured directly into horizontal joints to form a tough resilient seal possessing a limited degree offlexibility. Nitoseal 280 is available in a range of attractive colours with a separate colour pack providing visual mixing control.
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal MS600

      • Nitoseal MS600 is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistantelastomer. Conforms to the DWI Water Quality Regulations25(1)(b) for products having a small surface area in contact with water for public supply.
    • Placeholder Image
      Read more
      • , ,

      • Nitotile Grout

      • Nitotile Grout is a blend of specially selected cements, fillers and synthetic organic polymers. When added to water it readily blends to produce a smooth creamy paste which when set is water and mould resistant. Nitotile Grout is used in conjunction with Nitotile* tile adhesives.
    • Placeholder Image
      Read more
      • , ,

      • Nitotile GTA

      • Prepacked product requiring only direct mixing at site„ High adhesive bond strength - Ideal for vertical and horizontal applications of granite, marble, etc. „Excellent grab during open time„ Quick fixing - Reduces labour costs„ Can be used in the interior and exterior of buildings
    • Placeholder Image
      Read more
      • , ,

      • Nitowrap EP(CF)

      • Nitowrap EP(CF) is a carbon fibre composite wrapping system where Nitowrap (CF) is used in conjunction with an epoxy sealer cum primer, Nitowrap 30 and a high build epoxysaturant Nitowrap 410. The system is protected by a polyurethane top coat of Nitowrap 512 in case of atmospherically exposed structures
    • Placeholder Image
      Read more
      • , ,

      • Nitowrap EP(GF)

      • Nitowrap EP(GF) is a glass fibre composite wrapping system where Nitowrap GF is used in conjunction with an epoxy sealercum primer, Nitowrap 30, and a high build epoxy saturant Nitowrap 410. The system is protected by a polyurethane topcoat of Nitowrap 512 in case of atmospherically exposed structures.
    • Placeholder Image
      Read more
      • , ,

      • Norcure Chloride Extraction

      • Chloride extraction is carried out by applying a regulated current in order to create a safe electric field between the reinforcement in the concrete and a temporary, externally mounted anode mesh. During the treatment negatively charged chloride ions are driven from the concrete by an induced positive/negative field effect. Concurrent to the chloride ion removal process, electrolysis at the reinforcement…
    • Placeholder Image
      Read more
      • , ,

      • Norcure Realkalisation

      • Realkalisation is carried out by applying a safe electric current between the reinforcement in the concrete and a temporary,externally mounted anode mesh. During treatment, analkaline electrolyte solution is transported into the concreteby a process of electro-osmosis, increasing the alkalinity of the cover zone. At the same time, electrolysis at the reinforcement surface produces a high pH environment,which repassivates the steel…
    • Placeholder Image
      Read more
      • , ,

      • Patchroc

      • Patchroc is supplied as a pre-blended dry powder to which water is added to produce an easily trowellable mortar. Patchroc is a blend of inorganic cements, additives to modify and control the rate of setting and strength gain, with selected hard wearing aggregates. Patchroc does not contain calciumchloride. Patchroc has been designed for the patching of small areas of concrete…
    • Placeholder Image
      Read more
      • , ,

      • Proofex Torchseal 3P & 4P®

      • Proofex Torchseal 3P and 4P are quality torch applied APP based membranes manufactured from premium grade heavily modified bitumen, reinforced with a core of non-woven polyester fabric, weighing 180g/m², rot-proof and is malleable. The core gives the membrane its excellent mechanical properties, allows for good elongation and affords high resistance to piercing. Proofex Torchseal 3P and 4P membranes are ideal…
    • Placeholder Image
      Read more
      • , ,

      • Reebol®

      • Reebol is specially formulated blend of mineral oils and chemicals having release properties which are superior to those of a conventional mould oil. The chemicals react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould, thereby enabling easy striping from concrete and acting as a protection to steel and wooden…
    • Placeholder Image
      Read more
      • , ,

      • Reebol® Emulsion

      • Rainfall : It is necessary to protect freshly coated form work from rain which may dilute the emulsion before it has dried.After drying the coating will withstand an occasional lighty shower but may be affected by heavy or continuous rain. In such cases, a further coat is advised once surfaces have dried out thoroughly. De-moulding : De-moulding can be carried…
    • Placeholder Image
      Read more
      • , ,

      • Reebol® Emulsion Xtra

      • Reebol Emulsion Xtra is supplied as a pale amber liquid which turns white when diluted with water to produce a chemical release agent, combining the outstanding release properties of such materials with the economy of a conventional oil. It reacts with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which…
    • Placeholder Image
      Read more
      • , ,

      • Reebol® Std

      • Reebol Std is specially formulated blend of mineral oils and chemicals having release properties which are superior to those of a conventional mould oil. The chemicals react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould, thereby enabling easy striping from concrete and acting as a protection to steel and…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc CF

      • Renderoc CF is a crack sealing/filling cementitious material in powder form. It is easy to apply and can be finished or smooth ened off with a putty blade or a damp sponge. It sets quickly on application and can be over coated with common paints / coatings.
    • Placeholder Image
      Read more
      • , ,

      • Renderoc FC

      • Renderoc FC is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious mortar. Renderoc FC exhibits excellent thermal compatibility with concrete, and is fully compatible with other Renderoc*†mortars and Dekguard*† protective coatings.
    • Placeholder Image
      Read more
      • , ,

      • Renderoc HB2

      • Renderoc HB2 is a light weight, cementitious, polymer modified repair mortar to provide high build properties as well as excellent resistance to chloride ions and the diffusion of acidic gases such as carbon dioxide. It contains special preblended cements, graded sands and chemical additives which thermally combine to provide a product that has excellent compatibility with concrete as well as…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc Plug

      • Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the addition of clean water at site to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc RG

      • Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrink repair micro concrete.The material is based on Portland cements, graded aggregates and fillers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc RG Spl

      • Renderoc RG Spl is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrink repair micro concrete.Th e material is based on Portland cements, graded aggregates and fillers, and additives which impart controlled expansion characteristic s in the plastic state, while minimising water demand. The low…
    • Placeholder Image
      Read more
      • , ,

      • Renderoc RSXtra

      • Renderoc RSXtra is a blend of dry powders and graded aggreates which requires only the site additon of clean water to produce a highly consistent, high strength, free flowing repair concrete which self-compacts, Renderoc RSXtra exhibits excellent compatibility with concrete and good water repellent properties.