Shop

This is where you can browse products in this store.

    • Placeholder Image
      Read more
      • ,

      • 307

      • A factory made bagged cementitious powder, containing portland cement and silica sand, it can be mixed with water for installing small and medium size ceramic floor tiles in interior areas using the thin-set method of installation.
    • Placeholder Image
      Read more
      • ,

      • 315 G

      • It is a versatile high strength adhesive designed for installation of all types tiles over structurally sound, clean surfaces such as concrete, cement mortar beds, exterior grade plywood, steel & vinyl tiles. LATAPoXY® 210 Modified Epoxy Adhesive is highly suited for high traffic commercial installations where materials must resist physical abuse, shock and light chemicals.
    • Placeholder Image
      Read more
      • ,

      • 315 W

      • A three part, 100% solid epoxy grout specifically formulated for maximum chemical and high temperature resistance. It is recommended for extreme industrial and commercial applications such as dairies, food processing units, commercial kitchens, breweries, beverage plants, pharmaceuticals, and meat packaging plants.
    • Placeholder Image
      Read more
      • ,

      • 325 G

      • It is a high strength 100% solid epoxy adhesive, highly suitable for chemical resistant installation of quarry tile, brick and pavers on internal floors of food processing plants, commercial plants, commercial kitchens and beverage plants. Ideal for installing moisture sensitive marbles, it can be used on all metals, including copper
    • Placeholder Image
      Read more
      • ,

      • 325 W

      • It is a versatile, high strength adhesive for installation of tiles or stone and many kinds of plastics and metals on different substrates. It is specially formulated for fixing stone veneers. LATAPoXY® 270 Epoxy Adhesive meets and exceeds the requirements of international standards.
    • Placeholder Image
      Read more
      • ,

      • 335 G

      • A high performance dry set adhesive to be mixed with water or latex for installing medium & large format ceramic tiles, vitrified tiles, marble and stone on floors and walls. Combine with LATICRETE®73 Crete Admix for improved performance or with LATICRETE® 333 Super flexible Latex Admix for use on plywood.
    • Placeholder Image
      Read more
      • , ,

      • Accelerator BMW

      • WATERPLUG (S) is a fast setting hydraulic compound stops running water instantly. WATERPLUG (S) sets in 1 to 3 minutes depending upon the temperature of mixing water and the surface to which it is applied. Lower temperature will retard the setting time and higher temperature accelerates the setting time.
    • Placeholder Image
      Read more
      • , ,

      • Auramix 350 DIS

      • Auramix 350 DIS is a unique combination of new generation su-per plasticizer based on polycarboxilic ether polymer with long lateral chain. Electrostatic dispersion mechanism considerably reduces the water demand in fl owable concrete. It is supplied as a light brown liquid, instantly dispersible in water. Auramix 350 DIS disperses the cement particles effectively in the concrete mix and hence exposes…
    • Placeholder Image
      Read more
      • , ,

      • Brushbond

      • Brushbond is a two component acrylic polymer modifiede lastomeric waterproofing membrane which consists of Brushbond powder and Nitobond BB acrylic emulsion. It requires only the addition of water on site and when mixed in the proper proportions, an easily brushable coating is produced. Brushbond can simply be applied by a stiff brush,or trowel to obtain the desired thickness. Brushbond powder…
    • Placeholder Image
      Read more
      • , ,

      • Brushbond RFX

      • Brushbond RFX is a two component acrylic polymer modified cementitious coating which consists of Brushbond RFX powder and Nitobond BBX acrylic emulsion. It requires only the addition of clean water at site to produce an easily brushable coating. Brushbond RFX can simply be applied by stiff brush,roller or trowel to obtain the desired thickness
    • Placeholder Image
      Read more
      • , ,

      • Brushbond Coolcoat

      • Brushbond Coolcoat is a water-based white coloured emulsion comprising of polymers and specially designed hollow “microspheres”, less than 100 microns in diameter with non conductive properties. These microspheres collectively acts as thermal insulation blanket covering the structure effectively reflecting solarradiation back into the atmosphere. This results in impressive temperature reduction behind the substrate
    • Placeholder Image
      Read more
      • , ,

      • Brushbond TGP

      • Brushbond TGP* crystalline capillary waterproofing system contains proprietary blend of portland cement, quartz aggregate and special chemicals. In the presence of moisture, the active chemicals in Brushbond TGP* crystalline waterproofing system penetrates concrete and react chemically with free lime to produce insoluble crystals. This crystalline growth reduces porosity by blocking capillaries and filling hairline non structural cracks ( upto 0.25mm…
    • Placeholder Image
      Read more
      • , ,

      • Brushbond TI Flexicoat

      • Brushbond TI Flexicoat is a water-based white colouredemulsion comprising of acrylic polymers and specially designed hollow “microspheres”, less than 100 microns indiameter with non conductive properties These microspheres collectively acts as thermal insulation blanket covering the structure effectively reflecting solar radiation back into the atmosphere. This results in impressive temperature reduction behind the substrate by a min. of 10oC. This…
    • Placeholder Image
      Read more
      • , ,

      • Cebex® 100

      • Cebex 100, a plasticised expanding grout admixture is supplied as a powder. The material is a combination of a plasticising agent and a gas producing expansion medium.The plastisicing agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and…
    • Placeholder Image
      Read more
      • , ,

      • Cebex® FCC422

      • Cebex FCC422 is supplied as a powder additive. The material is a combination of a plasticising agent, and a gas producing expansive medium, with suitable fillers; which generates gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. Stability and cohesion of grout are greatly increased. The selected fillers used…
    • Placeholder Image
      Read more
      • , ,

      • Cebex®200

      • Cebex 200 a plasticising and hydrogen free expansion grout admixture is supplied as a powder admixture. Cebex 200allows the use of a reduced water / cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.
    • Placeholder Image
      Read more
      • , ,

      • Cemtop® 250T

      • Cemtop 250T is a blend of specially selected cements,graded aggregates, polymers and set control additives. It is supplied as a dry, grey powder which requires only the addition of water to produce a smooth free flowing and self levelling material which can be laid to a feather edge. This provides an ideal fairing material for levelling uneven, in situ or…
    • Placeholder Image
      Read more
      • , ,

      • Cemtop® 400SD

      • Cemtop 400SD is a blend of selected cements, hard-wearinggraded aggregates modified with polymers and flow agents.It is supplied as a dry, grey powder which requires only the addition of water to produce a self smoothing, free flowing material. Cemtop 400SD may be applied by hand or by use of acontinuous mixer pump.
    • Placeholder Image
      Read more
      • , ,

      • Cemtop® HD

      • Cemtop HD is a blend of selected cements, graded aggregates, polymers and flow agents. It is supplied as a dry, grey powder which requires only the addition of water to produce a self smoothing, free flowing material. Cemtop HD may be applied either by hand, or via the use of a continuous mixer pump
    • Placeholder Image
      Read more
      • , ,

      • Colpor 200

      • Fosroc Colpor 200 cold applied, two part polyurethanesealant is designed for joints in concrete paved areas. The capability of accommodating cyclic movements is retained by Colpor 200 throughout extremes of temperature conditions. Colpor 200 is resistant to fuel, oil and hydraulic fluid spillage,will not harden in cold weather nor become excessively soft or pick up in hot conditions. Colpor 200…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra GP2

      • Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free lowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra GP3

      • Conbextra GP3 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses upto 100mm. Conbextra GP3 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra GPI

      • Conbextra GPI is supplied as a ready to use dry powder,requiring only the addition of water to produce a free-flowing,non-shrink grout. The material is blend of specially processedcement, pregraded fillers and additives which impart : Good early and final strengths due to very low waterr equirement„ Controlled expansion to retain the original volume filledeven after setting„ Free flow characteristics without…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® AT

      • Conbextra AT is supplied as a ready-to-use dry powder,requiring only the addition of water to produce a free flowingnon-shrink grout. The material is a blend of specially processed cement, pregraded fillers and additives which impart : High early and final strengths due to very low water requirement. Controlled expansion to retain the original volume filled even after setting Free flow…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® BPG

      • Conbextra BPG grout is supplied as a ready to use dry mixture. The addition of a controlled amount of clean water produces a pourable, non-shrink grout for bolt pockets up to1000mm depth. (Bolt pocket size 150 x 150). Conbextra BPG grout is a blend of Portland cement, graded fillers, graded coarse aggregates and chemical additives which impart controlled expansion in…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® Capsule

      • Conbextra Capsule is supplied as a ready to use dry powder encapsulated in a perforated skin, available in three grades- Fast, Medium and slow set. When required for use the capsule is submerged in water to allow sufficient water to be absorbed through the perforations to form a non-shrink, thixotropic cementitious grout.
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® EP300

      • Conbextra EP300 is a low exotherm material which is particularly suitable where long working time is needed; for large gaps (up to 300 mm) or for grouting at high ambient temperatures (up to 55°C). Conbextra EP300 is a three component system consisting of base resin, liquid hardener and specially graded inert fillers.
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® HES

      • Conbextra HES is supplied as a ready to use dry powder.The addition of a controlled amount of clean water producesa free flowing, non-shrink grout for gap thicknesses up to50mm. Conbextra HES is a blend of Portland cement, graded filler sand chemical additives which impart non shrink property whilst minimising water demand. The formulation ensures high early strength. The graded filler…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® HF

      • Conbextra HF is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free-flowing precision grout for gap thickness up to 125mm.In addition the low water requirement ensures high early strength and long term durability. Conbextra HF is a blend of portland cements, graded fillers and chemical additives which impart controlled…
    • Placeholder Image
      Read more
      • , ,

      • Conbextra® HR

      • Conbextra HR is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non shrink grout for applications in high temperature zones. Conbextra HR is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion,while minimising water demand. The product is designed to provide resistance…