Shop

This is where you can browse products in this store.

    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® FC150

      • Nitoflor FC150 is a solvent free system based on epoxy resinsand curing agents specially selected for their ability to with stand chemical attack. The system consists of pre-weighed base & hardener components and a Nitoflor colour pack, all of which contain reactive elements that are essential to the installation of the system. A slip resistant texture can be provided by…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® FC550

      • Nitoflor FC550 is a four-component water miscible epoxy resincoating system, based on new generation epoxy resin technology, supplied in pre-weighed packs ready for on-sitemixing and use. The cured film forms a hard, matt and water vapour permeableseal to concrete. This permeability allows it to be applied on damp substrates and green concrete. The product is available in a wide range…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® Hardtop & Standard

      • Nitoflor Hardtop / Nitoflor Hardtop Standard are quality controlled, factory blended powder which are ready to use onsite. They contain special hardwearing aggregates which have been selected for abrasion and wear resistant propertiesas well as shape and size. These latter considerations,together with the use of high performance workability admixtures, produces a material which is easy to trowel into the surface…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® Levelcrete

      • Nitoflor Levelcrete is a blend of specially selected cements,graded aggregates, polymers and additives. It is supplied asa dry, grey powder which requires only the addition of water to produce a free fluid material. This provides an ideal levelling material for levelling uneven, in situ or precast concrete floors. Nitoflor Levelcrete has been specifically formulated to enable it to be applied…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® SL2050

      • Nitoflor SL2050 is a four-component, self-levelling, water miscible epoxy resin floor topping, based on new generation epoxy resin technology, supplied in pre-weighed packs ready for on-site mixing and use. The cured film forms a hard, matt and water vapour permeableseal to concrete. This permeability allows it to be applied on damp substrates and green concrete. The product is available in…
    • Placeholder Image
      Read more
      • , ,

      • Nitoflor® SLW

      • Nitoflor SLW is water based with a special blend of selected epoxy resins, curing agents and graded inert aggregates which, when mixed, provides a 1.5 - 3mm epoxy resin floor topping with unique laying properties. The materials are supplied in pre weighed packs ready to mix and use on site. The system includes a two part epoxy resin primer, NitoprimeXG,…
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar 30

      • Nitomortar 30 is a three part solvent free combination of epoxyresin, modified amine hardeners filled with specially graded chemically inert aggregates with high crushing strength. It is applied by trowel as a durable chemical resistant repair mortar 3-6 mm thick depending upon the requirement. The system includes Nitoprime 25 a two part epoxy resin primer and Nitomortar 30 which are…
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar FC

      • Nitomortar FC is a two component thixotropic, solvent free,compound based on epoxy resins, graded fillers and thixotropic agents. It is applied directly to concrete substrates,without primer, and cures to a surface ready for over coating.The base component is light grey coloured and the hardener black to ease identification of uniform mixing.
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar PE

      • Nitomortar PE products are based on a polyester resin system. There are two grades: Nitomortar PE - for general purpose use Nitomortar PE Concrete - a special grade allowing users to add suitable aggregate, thereby substantially reducing the cost of infilling larger voids. Winter versions of both products are available which are faster setting at low ambient temperatures. Both grades…
    • Placeholder Image
      Read more
      • , ,

      • Nitomortar S

      • Nitomortar S is based on a high quality solvent-free epoxyresin system. The special silica aggregates provide high strength and excellent abrasion resistance. Nitomortar S is a three - component material supplied in pre-weighed quantities ready for on-site mixing and use.
    • Placeholder Image
      Read more
      • , ,

      • Nitoproof 100/120

      • Nitoproof 100 and 120 are based on raw materials which are amongst the most water and water-vapour resistant surface coating materials available. They are also resistant to a wide range of chemical attack. Specially selected bitumens are blended to produce various grades, each designed to provide the best possible protectivecoating for its practical purpose. Nitoproof 120 incorporates fibres which give…
    • Placeholder Image
      Read more
      • , ,

      • Nitoproof 120

      • Nitoproof 120 is based on selected bitumens that are blended together with non-asbestos reinforcing fibres to provide an outstanding liquid grade material used for intermediate thickness coating. When dry Nitoproof 120produces quality, high film build flexible bitumen coating.
    • Placeholder Image
      Read more
      • , ,

      • Nitoproof 600

      • Nitoproof 600 single component pitch modified polyurethanecures by reaction with atmospheric moisture to give a toughelastomeric waterproof membrane. It is supplied in a single grade to meet all site application methods and requirements. Nitoproof 600 is a medium viscosity grade (approximately 600 poise) for roller, squeegee or spray application to horizontal and vertical surfaces.
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 200

      • Nitoseal 200 is a black two part pitch extended polysulphide based joint sealant which cures to form a low modulus durable and elastic seal. The material is self levelling and can be poured directly into horizontal joints. When cured, Nitoseal 200 forms a highly resilient seal which can accommodate large cyclic movements over a wide range of ambient temperatures. Used…
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 215(I)

      • Nitoseal 215(I) is a two-part, gun grade polysulphide sealant for filling and sealing joints in building construction. It is elastic, weather-resistant, non-sagging and water-tight without standing adhesion to practically all surfaces when used with the correct primer. Supplied in a composite pack containing the Base sealant and Hardener in pre-measured quantities. Colour : Grey
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal 280

      • Nitoseal 280 two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers. The mixed sealant is self levelling and can be poured directly into horizontal joints to form a tough resilient seal possessing a limited degree offlexibility. Nitoseal 280 is available in a range of attractive colours with a separate colour pack providing visual mixing control.
    • Placeholder Image
      Read more
      • , ,

      • Nitoseal MS600

      • Nitoseal MS600 is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistantelastomer. Conforms to the DWI Water Quality Regulations25(1)(b) for products having a small surface area in contact with water for public supply.
    • Placeholder Image
      Read more
      • , ,

      • Nitotile Grout

      • Nitotile Grout is a blend of specially selected cements, fillers and synthetic organic polymers. When added to water it readily blends to produce a smooth creamy paste which when set is water and mould resistant. Nitotile Grout is used in conjunction with Nitotile* tile adhesives.
    • Placeholder Image
      Read more
      • , ,

      • Nitotile GTA

      • Prepacked product requiring only direct mixing at site„ High adhesive bond strength - Ideal for vertical and horizontal applications of granite, marble, etc. „Excellent grab during open time„ Quick fixing - Reduces labour costs„ Can be used in the interior and exterior of buildings
    • Placeholder Image
      Read more
      • , ,

      • Nitowrap EP(CF)

      • Nitowrap EP(CF) is a carbon fibre composite wrapping system where Nitowrap (CF) is used in conjunction with an epoxy sealer cum primer, Nitowrap 30 and a high build epoxysaturant Nitowrap 410. The system is protected by a polyurethane top coat of Nitowrap 512 in case of atmospherically exposed structures
    • Placeholder Image
      Read more
      • , ,

      • Nitowrap EP(GF)

      • Nitowrap EP(GF) is a glass fibre composite wrapping system where Nitowrap GF is used in conjunction with an epoxy sealercum primer, Nitowrap 30, and a high build epoxy saturant Nitowrap 410. The system is protected by a polyurethane topcoat of Nitowrap 512 in case of atmospherically exposed structures.
    • Placeholder Image
      Read more
      • , ,

      • Norcure Chloride Extraction

      • Chloride extraction is carried out by applying a regulated current in order to create a safe electric field between the reinforcement in the concrete and a temporary, externally mounted anode mesh. During the treatment negatively charged chloride ions are driven from the concrete by an induced positive/negative field effect. Concurrent to the chloride ion removal process, electrolysis at the reinforcement…
    • Placeholder Image
      Read more
      • , ,

      • Norcure Realkalisation

      • Realkalisation is carried out by applying a safe electric current between the reinforcement in the concrete and a temporary,externally mounted anode mesh. During treatment, analkaline electrolyte solution is transported into the concreteby a process of electro-osmosis, increasing the alkalinity of the cover zone. At the same time, electrolysis at the reinforcement surface produces a high pH environment,which repassivates the steel…